ProForm PFTL66010.0 user manual Make sure that the console wire C stays

9.	With the help of a second person, hold the	9
	handrail assembly (B) upside-down near the
	console assembly (A). Connect the Console
	Ground Wires (6) in the handrail assembly to
	the ground wires in the console assembly.				B
	Insert the console wire (C) into the track in the
	console assembly (A).
	Insert the Console Ground Wires (6) into the
	hole in the console assembly (A) as you set the		A
	handrail assembly (B) in the console assembly.
	Make sure that the console wire (C) stays in				102
	the track. Be careful not to pinch any wires.
					C
			6		Track
			Ground
			Wires
10.	Attach the handrail assembly (B) to the console	10
	assembly (A) with two #8 x 3/4" Washer Head		83	2
	Screws (2). Start both Washer Head Screws,
	and then tighten both of them. Be careful not		B		38
	to overtighten the Washer Head Screws.
	Attach a Console Clamp (105) to the console		A
	assembly (A) with two #8 x 1" Screws (52).		2		52
	Start both Screws, and then tighten both of
	them. Be careful not to overtighten the			52
	Screws. Attach the other Console Clamp (105)		105		105
	in the same way.
	Remove the wire ties from the Handrails (82,		38
	83). Press the 5/16" Cage Nuts (38) back into
	place, if necessary.		82
		11