ASSEMBLY
To hire an authorized service technician to assemble the treadmill, call
Assembly requires two persons. Set the treadmill in a cleared area and remove all packing materials. Do not dispose of the packing materials until assembly is completed. Note: The underside of the treadmill walking belt is coated with
Assembly requires the included hex keys | and your own phillips screwdriver | , rubber | |
mallet | , and adjustable wrench | . |
|
For help identifying the assembly hardware, see the drawings below. If a part is not in the parts bag, check to see if it has been
Wheel Bolt | Console | 3/4” Screw | 1” Tek Screw |
| Bolt |
|
|
|
| Nut | Star |
Extension Leg Bolt/ |
| Washer | |
|
| ||
Handrail Bolt |
|
|
|
3” Bolt |
| Extension Leg | 1/4” Star Washer |
| Nut |
1. Make sure that the power cord is unplugged. | 1 |
|
|
|
|
| |
With the help of a second person, carefully tip |
|
|
|
the treadmill onto its left side as shown. Partially |
|
| 57 |
fold the Frame (86) so the treadmill is more sta- |
|
| |
|
|
| |
ble. Do not fully fold the treadmill until it is | 69 |
|
|
completely assembled. | 93 |
|
|
|
|
| |
Remove the metal packing insert from the base | 95 |
|
|
|
|
| |
of the Uprights (69). Insert an Extension Leg (63) |
|
| 39 |
into the base of the Uprights (69). Hold an |
|
|
|
Extension Leg Nut (46) in the bottom of the |
| 95 | 39 |
Extension Leg, and thread a Extension Leg Bolt | 46 | ||
(93) with a Star Washer (95) into the top of the | 63 |
| 96 |
|
| ||
Extension Leg. Next, thread a 3” Bolt (96) with a |
|
| |
|
|
| |
Star Washer into the bottom of the Extension leg. | 86 |
|
|
Firmly tighten the Bolts. |
|
|
|
Attach two Base Pads (57) to the base of the |
|
|
|
Uprights (69) with two 1” Tek Screws (39). |
|
|
|
| 6 |
|
|