ProForm PFTL58007.1 user manual Star Washers 9. Firmly tighten the Bolts

7. Press a Front Handrail Endcap (97) into the Left	7
Handrail (33). Attach the Front Handrail Endcap
with a #8 x 3/4" Endcap Screw (16).						97
Slide the Left Collar (47) onto the Left Upright
(74). Align the large holes in the Left Collar
with the large holes in the Left Upright. Set					16
the Left Handrail (33) on the Left Collar.
Attach the Left Handrail (33) with two 3/8" x		33
1 1/4" Bolts (7) and two 3/8" Star Washers (9).
Firmly tighten the Bolts.
Tighten two #8 x 3/4" Screws (12) into the Left				9	12
			47
Collar (47).
			74		7
8. Hold the Right Handrail (34) near the Right	8
Upright (78). Insert the Upright Wire (38)
through the Right Collar (60), into the hole in the						97
bottom of the Right Handrail, and out of the				16
large hole in the side of the Right Handrail.			Large
			Hole
See the inset drawing. Insert the included plas-			38
tic tie through the holes in the Right Handrail
(34) as shown. Look inside the Right Handrail.	Plastic Tie
Make sure that the plastic tie holds the
Upright Wire (38) to the side as shown in the	7	9
inset drawing. Tighten the plastic tie.
Press a Front Handrail Endcap (97) into the				60	Hole
Right Handrail (34). Attach the Front Handrail						Tie
					34
Endcap with a #8 x 3/4" Endcap Screw (16).
Attach the Right Handrail (34) to the Right Collar		34	12			38
(60) with two 3/8" x 1 1/4" Bolts (7) and two 3/8"
Star Washers (9). Firmly tighten the Bolts.			78
						60
Tighten two #8 x 3/4" Screws (12) into the Right
					Hole
Collar (60).
9. Attach the Pulse Bar Bottom (95) to the Left	9
Handrail (33) and the Right Handrail (34) with
		33
two #10 x 3/4" Screws (5) and two #10 Star
Washers (27).
Remove the long tie from the Upright Wire (38).			27	Long Tie
			5
					5	38
			95		27
				34
	9