ProForm PFTL96008.0 HOW to Turn on the Power, HOW to USE the Manual Mode, Select the manual mode

Page 15
Reset
Position

HOW TO TURN ON THE POWER

IMPORTANT: If the treadmill has been exposed to cold temperatures, allow it to warm to room tem- perature before turning on the power. If you do not do this, you may damage the console displays or other electrical components.

Plug in the power cord (see page 13). Next, locate the reset/off circuit breaker on the treadmill frame near the power cord. Switch the cir- cuit breaker to the reset po- sition.

IMPORTANT: The console features a display demo mode, designed to be used if the treadmill is dis- played in a store. If the displays light as soon as you plug in the power cord and switch the reset/off circuit breaker to the reset position, the demo mode is turned on. To turn off the demo mode, hold down the Stop button for a few seconds. If the displays remain lit, see THE INFORMATION MODE on page 19 to turn off the demo mode.

Next, stand on the foot rails of the treadmill. Find the clip attached to the key (see the drawing on page 14) and slide the clip onto the waistband of your clothes.

Then, insert the key into the console. After a moment, the displays will light. IMPORTANT: In an emergency situation, the key can be pulled from the console, causing the walking belt to slow to a stop. Test the clip by carefully taking a few steps backward; if the key is not pulled from the console, adjust the posi- tion of the clip.

IMPORTANT: If there are sheets of clear plastic on the console, remove the plastic. To prevent dam- age to the walking platform, wear clean athletic shoes while using the treadmill. The first time you use the treadmill, observe the alignment of the walking belt, and center the walking belt if neces- sary (see page 24).

Note: The console can display speed and distance in either miles or kilometers. To find out which unit of measurement is selected or to change the unit of mea- surement, see THE INFORMATION MODE on page 19. Note: For simplicity, all instructions in this section refer to miles.

HOW TO USE THE MANUAL MODE

1.Insert the key into the console.

See HOW TO TURN ON THE POWER at the left.

2.Select the manual mode.

When the key is inserted, the manual mode will be

selected. If Track you have se-

lected a work-

out, press any of the workout buttons repeatedly until a track appears in the display.

3.Start the walking belt.

To start the walking belt, press the Start button, the Speed increase button, or one of the numbered Quick Speed buttons.

If you press the Start button or the Speed increase button, the walking belt will begin to move at 1 mph. As you exercise, change the speed of the walking belt as desired by pressing the Speed increase and decrease buttons. Each time you press a but- ton, the speed setting will change by 0.1 mph; if you hold down a button, the speed setting will change in increments of 0.5 mph.

If you press one of the numbered Quick Speed but- tons, the walking belt will gradually change speed until it reaches the selected speed setting.

To stop the walking belt, press the Stop button. The time will begin to flash in the display. To restart the walking belt, press the Start button, the Speed increase button, or one of the numbered Quick Speed buttons.

15

Page 14 Page 16
Image 15
Page 14 Page 16
Contents On the WEB QUESTIONS?Model No. PFTL96008.0 Serial No Mon.-Fri a.m.-6 p.m. MT Sat a.m.-4 p.m. MTTable of Contents Pulse sensor is not a medical device Important PrecautionsPage Before YOU Begin Assembly Page Right Upright do not fully tighten the Bolts Yet With a second Bolt Spacer 84, 3/8 x 4 Bolt 3/8 Star WasherNot fully tighten the Bolts yet Not fully fold the Frame yetOvertighten the Locknut the Wheel must Turn freely Bolts yetPage Repeat this step on the left side Page Operation and Adjustment HOW to Plug in the Power CordPRE-LUBRICATED Walking Belt Features of the Console Console DiagramInsert the key into the console HOW to Turn on the PowerHOW to USE the Manual Mode Select the manual modeMeasure your heart rate if desired. Before using Select one of the preset workouts. To select one HOW to USE a Preset WorkoutInsert an iFit card and select a workout HOW to USE AN Ifit WorkoutHOW to USE the Stereo Sound System Information ModeHOW to Move the Treadmill HOW to Fold and Move the TreadmillHOW to Lower the Treadmill for USE Troubleshooting Problem The power turns off during useCompatible with GFCI-equipped outlets Top Problem The walking belt slows when walked onProblem Solution Exercise Frequency Exercise GuidelinesExercise Intensity Workout GuidelinesKey No. Qty Description Part LIST-Model No. PFTL96008.0107 Console Wire Tie Userʼs Manual Exploded Drawing A-Model No. PFTL96008.0 R1209A Exploded Drawing B-Model No. PFTL96008.0 R1209A Exploded Drawing C-Model No. PFTL96008.0 R1209A Exploded Drawing D-Model No. PFTL96008.0 R1209A Ordering Replacement Parts Limited WarrantyIcon Health & Fitness, Inc., 1500 S W., Logan, UT

PFTL96008.0 specifications

The ProForm PFTL96008.0 is a versatile treadmill designed for fitness enthusiasts seeking an effective and efficient workout experience. Engineered with a combination of advanced technology and user-friendly features, this treadmill caters to a variety of fitness levels, making it an ideal addition to any home gym.

One of the standout features of the PFTL96008.0 is its powerful motor. The treadmill is equipped with a robust 3.0 CHP motor, ensuring smooth and consistent performance during both leisurely walks and intense running sessions. This motor provides a maximum speed of up to 12 mph, allowing users to push their limits and achieve their fitness goals.

Incline training is a crucial element for those looking to enhance their workouts, and the ProForm PFTL96008.0 does not disappoint. It boasts a 0-15% incline range, enabling users to simulate hill workouts and increase calorie burn. The incline can be adjusted easily with a simple press of a button, allowing for a seamless transition between different workout intensities.

The running surface of the PFTL96008.0 features a spacious 20" x 60" deck, providing ample room for running and walking sessions. Additionally, the treadmill is equipped with ProForm's innovative FlexSelect cushioning, which allows users to customize the level of impact on their joints. This feature ensures a comfortable experience, reducing the risk of injury during vigorous workouts.

Another notable aspect of the PFTL96008.0 is its integrated technology. The treadmill includes a 10-inch touchscreen display, providing a variety of workout programs and metrics, such as speed, distance, time, and calories burned. The machine is also compatible with iFit, a subscription-based fitness platform that offers a vast library of interactive workouts led by professional trainers. Users can explore virtual running routes around the world, enhancing their motivation and engagement.

For added convenience, the ProForm PFTL96008.0 features built-in speakers and Bluetooth connectivity, allowing users to listen to their favorite music or attend virtual classes without the hassle of tangled wires. The treadmill also includes a tablet holder, enabling users to multitask while exercising.

Overall, the ProForm PFTL96008.0 stands out as a comprehensive treadmill, combining power, versatility, and advanced technology to deliver an exceptional workout experience. Whether you're a beginner or an experienced athlete, this treadmill is designed to help you reach your fitness objectives.
Top Page Image Contents