ProForm PFTL96008.0 user manual HOW to Fold and Move the Treadmill, HOW to Move the Treadmill

Page 20

HOW TO FOLD AND MOVE THE TREADMILL

HOW TO FOLD THE TREADMILL FOR STORAGE Before folding the treadmill, adjust the incline to the lowest position. If you do not do this, you may damage the treadmill when you fold it. Remove the key and unplug the power cord. CAUTION: You must be able to safely lift 45 lbs. (20 kg) to raise, lower, or move the treadmill.

1.Hold the metal frame firmly in the location shown by the arrow at the right. CAUTION: To decrease the pos- sibility of injury, do not lift the frame by the plastic foot rails. Make sure to bend your legs and keep your back straight as you raise the frame. Raise the frame about halfway to the vertical position.

2.Raise the frame until the latch knob locks into the storage position. Make sure that the latch knob is locked in the storage position.

To protect the floor or carpet from damage, place a mat under the treadmill. Keep the treadmill out of di- rect sunlight. Do not leave the treadmill in the storage position in temperatures above 85° F (30° C).

HOW TO MOVE THE TREADMILL

Before moving the treadmill, convert the treadmill to the stor- age position as described above. Make sure that the latch knob is locked in the storage position.

1.Hold a handrail and place one foot against one of the wheels.

2.Tilt the treadmill back until it rolls freely on the wheelsNever. Carefully move the treadmill to the desired location. move the treadmill without tipping it back. To reduce the risk of injury, use extreme caution while moving the treadmill. Do not attempt to move the treadmill over an uneven surface.

3.Place one foot against a wheel, and carefully lower the treadmill until it is resting in the storage position.

Frame

Latch

Knob

Handrail

Wheel

20

Page 19 Page 21
Image 20
Page 19 Page 21
Contents QUESTIONS? Model No. PFTL96008.0 Serial NoMon.-Fri a.m.-6 p.m. MT Sat a.m.-4 p.m. MT On the WEBTable of Contents Important Precautions Pulse sensor is not a medical devicePage Before YOU Begin Assembly Page With a second Bolt Spacer 84, 3/8 x 4 Bolt 3/8 Star Washer Right Upright do not fully tighten the Bolts YetNot fully fold the Frame yet Overtighten the Locknut the Wheel must Turn freelyBolts yet Not fully tighten the Bolts yetPage Repeat this step on the left side Page PRE-LUBRICATED Walking Belt Operation and AdjustmentHOW to Plug in the Power Cord Console Diagram Features of the ConsoleHOW to Turn on the Power HOW to USE the Manual ModeSelect the manual mode Insert the key into the consoleMeasure your heart rate if desired. Before using HOW to USE a Preset Workout Select one of the preset workouts. To select oneHOW to USE AN Ifit Workout Insert an iFit card and select a workoutInformation Mode HOW to USE the Stereo Sound SystemHOW to Fold and Move the Treadmill HOW to Move the TreadmillHOW to Lower the Treadmill for USE Compatible with GFCI-equipped outlets TroubleshootingProblem The power turns off during use Problem The walking belt slows when walked on TopProblem Solution Exercise Guidelines Exercise IntensityWorkout Guidelines Exercise FrequencyPart LIST-Model No. PFTL96008.0 Key No. Qty Description107 Console Wire Tie Userʼs Manual Exploded Drawing A-Model No. PFTL96008.0 R1209A Exploded Drawing B-Model No. PFTL96008.0 R1209A Exploded Drawing C-Model No. PFTL96008.0 R1209A Exploded Drawing D-Model No. PFTL96008.0 R1209A Icon Health & Fitness, Inc., 1500 S W., Logan, UT Ordering Replacement PartsLimited Warranty

PFTL96008.0 specifications

The ProForm PFTL96008.0 is a versatile treadmill designed for fitness enthusiasts seeking an effective and efficient workout experience. Engineered with a combination of advanced technology and user-friendly features, this treadmill caters to a variety of fitness levels, making it an ideal addition to any home gym.

One of the standout features of the PFTL96008.0 is its powerful motor. The treadmill is equipped with a robust 3.0 CHP motor, ensuring smooth and consistent performance during both leisurely walks and intense running sessions. This motor provides a maximum speed of up to 12 mph, allowing users to push their limits and achieve their fitness goals.

Incline training is a crucial element for those looking to enhance their workouts, and the ProForm PFTL96008.0 does not disappoint. It boasts a 0-15% incline range, enabling users to simulate hill workouts and increase calorie burn. The incline can be adjusted easily with a simple press of a button, allowing for a seamless transition between different workout intensities.

The running surface of the PFTL96008.0 features a spacious 20" x 60" deck, providing ample room for running and walking sessions. Additionally, the treadmill is equipped with ProForm's innovative FlexSelect cushioning, which allows users to customize the level of impact on their joints. This feature ensures a comfortable experience, reducing the risk of injury during vigorous workouts.

Another notable aspect of the PFTL96008.0 is its integrated technology. The treadmill includes a 10-inch touchscreen display, providing a variety of workout programs and metrics, such as speed, distance, time, and calories burned. The machine is also compatible with iFit, a subscription-based fitness platform that offers a vast library of interactive workouts led by professional trainers. Users can explore virtual running routes around the world, enhancing their motivation and engagement.

For added convenience, the ProForm PFTL96008.0 features built-in speakers and Bluetooth connectivity, allowing users to listen to their favorite music or attend virtual classes without the hassle of tangled wires. The treadmill also includes a tablet holder, enabling users to multitask while exercising.

Overall, the ProForm PFTL96008.0 stands out as a comprehensive treadmill, combining power, versatility, and advanced technology to deliver an exceptional workout experience. Whether you're a beginner or an experienced athlete, this treadmill is designed to help you reach your fitness objectives.
Top Page Image Contents