ProForm PFTL96008.0 user manual Troubleshooting, Compatible with GFCI-equipped outlets

Page 22

TROUBLESHOOTING

Most treadmill problems can be solved by following the steps below. Find the symptom that applies, and follow the steps listed. If further assistance is needed, please see the front cover of this manual. PROBLEM: The power does not turn on

SOLUTION: a. Make sure that the power cord is plugged into a surge suppressor, and that the surge suppressor

is plugged into a properly grounded outlet (see page 13). Use only a single-outlet surge suppres-

sor that meets all of the specifications described on page 13. IMPORTANT: The treadmill is not

compatible with GFCI-equipped outlets.

 

 

b. After the power cord has been plugged in, make sure that the key is inserted into the console.

c. Check the reset/off circuit breaker located on the

c

 

treadmill frame near the power cord. If the switch

 

protrudes as shown, the circuit breaker has

 

 

tripped. To reset the circuit breaker, wait for five

Tripped

Reset

minutes and then press the switch back in.

PROBLEM: The power turns off during use

 

 

SOLUTION: a. Check the reset/off circuit breaker (see the drawing above). If the circuit breaker has tripped, wait for five minutes and then press the switch back in.

b.Make sure that the power cord is plugged in. If the power cord is plugged in, unplug it, wait for five minutes, and then plug it back in.

c.Remove the key from the console. Reinsert the key into the console.

d.If the treadmill still will not run, please see the front cover of this manual.

PROBLEM: The console displays remain lit when you remove the key from the console

SOLUTION: a. The console features a display demo mode, designed to be used if the treadmill is displayed in a

store. If the displays remain lit when you remove the key, the demo mode is turned on. To turn off

the demo mode, hold down the Stop button for a few seconds. If the displays are still lit, see THE

INFORMATION MODE on page 19 to turn off the demo mode.

 

PROBLEM: The displays of the console do not function properly

 

 

SOLUTION: a. Remove the key from the console and UNPLUG

a

77

THE POWER CORD. With the help of a second

person, carefully tip the Uprights (77, 79) down.

 

 

There may be three #8 x 2" Screws (24) in the bot-

 

 

tom of the Belly Pan (70). If there are, remove

 

 

them. Note: A Phillips screwdriver with a shaft at

79

70

least 5 in. (13 cm) long is required. Then, raise the

Uprights.

 

 

 

 

24

 

 

24

22

Page 21 Page 23
Image 22
Page 21 Page 23
Contents Mon.-Fri a.m.-6 p.m. MT Sat a.m.-4 p.m. MT QUESTIONS?Model No. PFTL96008.0 Serial No On the WEBTable of Contents Important Precautions Pulse sensor is not a medical devicePage Before YOU Begin Assembly Page With a second Bolt Spacer 84, 3/8 x 4 Bolt 3/8 Star Washer Right Upright do not fully tighten the Bolts YetBolts yet Not fully fold the Frame yetOvertighten the Locknut the Wheel must Turn freely Not fully tighten the Bolts yetPage Repeat this step on the left side Page HOW to Plug in the Power Cord Operation and AdjustmentPRE-LUBRICATED Walking Belt Console Diagram Features of the ConsoleSelect the manual mode HOW to Turn on the PowerHOW to USE the Manual Mode Insert the key into the consoleMeasure your heart rate if desired. Before using HOW to USE a Preset Workout Select one of the preset workouts. To select oneHOW to USE AN Ifit Workout Insert an iFit card and select a workoutInformation Mode HOW to USE the Stereo Sound SystemHOW to Fold and Move the Treadmill HOW to Move the TreadmillHOW to Lower the Treadmill for USE Problem The power turns off during use TroubleshootingCompatible with GFCI-equipped outlets Problem The walking belt slows when walked on TopProblem Solution Workout Guidelines Exercise GuidelinesExercise Intensity Exercise FrequencyPart LIST-Model No. PFTL96008.0 Key No. Qty Description107 Console Wire Tie Userʼs Manual Exploded Drawing A-Model No. PFTL96008.0 R1209A Exploded Drawing B-Model No. PFTL96008.0 R1209A Exploded Drawing C-Model No. PFTL96008.0 R1209A Exploded Drawing D-Model No. PFTL96008.0 R1209A Limited Warranty Ordering Replacement PartsIcon Health & Fitness, Inc., 1500 S W., Logan, UT

PFTL96008.0 specifications

The ProForm PFTL96008.0 is a versatile treadmill designed for fitness enthusiasts seeking an effective and efficient workout experience. Engineered with a combination of advanced technology and user-friendly features, this treadmill caters to a variety of fitness levels, making it an ideal addition to any home gym.

One of the standout features of the PFTL96008.0 is its powerful motor. The treadmill is equipped with a robust 3.0 CHP motor, ensuring smooth and consistent performance during both leisurely walks and intense running sessions. This motor provides a maximum speed of up to 12 mph, allowing users to push their limits and achieve their fitness goals.

Incline training is a crucial element for those looking to enhance their workouts, and the ProForm PFTL96008.0 does not disappoint. It boasts a 0-15% incline range, enabling users to simulate hill workouts and increase calorie burn. The incline can be adjusted easily with a simple press of a button, allowing for a seamless transition between different workout intensities.

The running surface of the PFTL96008.0 features a spacious 20" x 60" deck, providing ample room for running and walking sessions. Additionally, the treadmill is equipped with ProForm's innovative FlexSelect cushioning, which allows users to customize the level of impact on their joints. This feature ensures a comfortable experience, reducing the risk of injury during vigorous workouts.

Another notable aspect of the PFTL96008.0 is its integrated technology. The treadmill includes a 10-inch touchscreen display, providing a variety of workout programs and metrics, such as speed, distance, time, and calories burned. The machine is also compatible with iFit, a subscription-based fitness platform that offers a vast library of interactive workouts led by professional trainers. Users can explore virtual running routes around the world, enhancing their motivation and engagement.

For added convenience, the ProForm PFTL96008.0 features built-in speakers and Bluetooth connectivity, allowing users to listen to their favorite music or attend virtual classes without the hassle of tangled wires. The treadmill also includes a tablet holder, enabling users to multitask while exercising.

Overall, the ProForm PFTL96008.0 stands out as a comprehensive treadmill, combining power, versatility, and advanced technology to deliver an exceptional workout experience. Whether you're a beginner or an experienced athlete, this treadmill is designed to help you reach your fitness objectives.
Top Page Image Contents