ProForm 831.297461 user manual

Page 17

PROBLEM: The walking belt is off-center or slips when walked on

SOLUTION: a. If the walking belt has shifted to the left, first re- move the key and UNPLUG THE POWER CORD. Using the allen wrench, turn the left rear roller adjust- ment bolt clockwise, and the right bolt counterclock- wise, 1/4 of a turn each. Be careful not to overtighten the walking belt. Plug in the power cord, insert the key and run the treadmill for a few minutes. Repeat until the walking belt is centered.

b. If the walking belt has shifted to the right, first re- move the key and UNPLUG THE POWER CORD. Using the allen wrench, turn the left rear roller adjust- ment bolt counterclockwise, and the right bolt clock- wise, 1/4 of a turn each. Be careful not to overtighten the walking belt. Plug in the power cord, insert the key and run the treadmill for a few minutes. Repeat until the walking belt is centered.

c. If the walking belt slips when walked on, first re- move the key and UNPLUG THE POWER CORD. Using the allen wrench, turn both rear roller adjust- ment bolts clockwise, 1/4 of a turn. When the walking belt is correctly tightened, you should be able to lift each side of the walking belt 3 to 4 inches off the walking platform. The center of the walking belt should just touch the walking platform. Be careful to keep the walking belt centered. Plug in the power cord, insert the key and run the treadmill for a few minutes. Repeat until the walking belt is properly tightened.

a

b

c

PROBLEM: The walking belt slows when walked on

SOLUTION: a. Use only a single-outlet surge suppressor that is UL 1449 listed as a transient voltage surge sup- pressor (TVSS). The surge suppressor must have a UL suppressed voltage rating of 400 volts or less and a minimum surge dissipation of 450 joules. The surge suppressor must be electrically rated for 120 volts AC and 15 amps.

b. If the walking belt is overtightened, treadmill perfor- mance may decrease and the walking belt may be permanently damaged. Remove the key and UN- PLUG THE POWER CORD. Using the allen wrench, turn both rear roller adjustment bolts counterclock- wise, 1/4 of a turn. When the walking belt is properly tightened, you should be able to lift each side of the walking belt 3 to 4 inches off the walking platform. The center of the walking belt should just touch the walking platform. Be careful to keep the walking belt centered. Plug in the power cord, insert the key and run the treadmill for a few minutes. Repeat until the walking belt is properly tightened.

b

3”–4”

Rear Roller Adjustment Bolts

c. If the walking belt still slows when walked on, please call our toll-free HELPLINE.

17

Page 16 Page 18
Image 17
Page 16 Page 18
Contents SEARS, Roebuck and CO., Hoffman ESTATES, IL Model No Serial NoFull 90 DAY Warranty Table of ContentsCrosstrainer Important PrecautionsPage Before YOU Begin Assembly Page HOW to Plug in the Power Cord HOW to Operate the TreadmillPerformant Lubetm Walking Belt HOW to Lower the Treadmill for USEBattery Installation Step by Step Console Operation Diagram of the ConsoleHOW to Fold the Treadmill to the Storage Position When you are finished exercising, stopCALORIES/FAT CAL Ories display -ThisHOW to Measure Your Heart Rate HOW to Exercise on the TreadmillExercise Intensity Workout GuidelinesSuggested Stretches HOW to Lower the Bench for USE HOW to Operate the Weight BenchHOW to Fold the Bench to the Storage Position HOW to Adjust the BackrestStrength Training Guidelines HOW to Exercise on the Weight BenchExercise Form Staying MotivatedTop Maintenance and TROUBLE-SHOOTINGProblem The power turns off during use Page HOW to Move the Crosstrainer Key No. Part No Qty Description Part LIST-Model NoExploded DRAWING-Model 126 Model No QUESTIONS?
Top Page Image Contents