ProForm 831.295040 user manual Console Base, but do not tighten it yet

5.Hold the Console Base (47) near the Left Handrail (71). Attach the end of the ground wire on the Console Base to the indicated small hole in the Left Handrail with the Silver Ground Screw (75).

6.Set the Console Base (47) on the Left and Right Handrails (71, 72).

Slide a Handrail Washer (100) and a Plastic Spacer (115) onto a 2” Screw (117), and insert the Plastic Spacer and the Screw into the hole in the bottom of the Right Handrail (72) as shown. Start the Screw into the

Console Base, but do not tighten it yet.

Repeat this step with the Left Handrail (71).

7.Press a Handrail Endcap (116) into the end of the Left Handrail (71). Start a 3/4” Screw (2) into the Handrail

Endcap and the Console Base, but do not tighten the Screw yet.

Repeat this step with the other Handrail Endcap (116) and the Right Handrail (72).

Tighten the two 3/4” Screws (2) and the two 2” Screws (117); being careful not to overtighten the Screws.

5
	Ground
	Wire
47
Small
Hole	75
71
6
115
100
117	47
71	115
	72
	100
	117
7	47
116
72	116
2	71
	2
117	117

8