ProForm 831.295033 user manual Troubleshooting, Problem The power turns off during use, Top

Page 16

TROUBLESHOOTING

Most treadmill problems can be solved by following the simple steps below. Find the symptom that applies, and follow the steps listed. If further assistance is needed, call toll-free 1-800-4-MY-HOME®(1-800-469-4663).

PROBLEM: The power does not turn on

SOLUTION: a. Make sure that the power cord is plugged into a surge suppressor, and that the surge suppressor is plugged into a properly grounded outlet (see page 10). Use only a single-outlet surge suppres- sor that meets all of the specifications described on page 10. Important: The treadmill is not com- patible with GFCI-equipped outlets.

b. After the power cord has been plugged in, make sure that the key is fully inserted into the console.

c.Check the reset/off circuit breaker located on the treadmill frame near the power cord. If the switch protrudes as shown, the circuit breaker has tripped. To reset the circuit breaker, wait for five minutes and then press the switch back in.

c

Tripped

Reset

PROBLEM: The power turns off during use

SOLUTION: a. Check the circuit breaker located on the treadmill frame near the power cord (see the drawing above). If the circuit breaker has tripped, wait for five minutes and then press the switch back in.

b.Make sure that the power cord is plugged in. If the power cord is plugged in, unplug it, wait for five minutes, and then plug it back in.

c.Remove the key from the console. Reinsert the key fully into the console.

d.If the treadmill still will not run, please call toll-free 1-800-4-MY-HOME®(1-800-469-4663).

PROBLEM: The displays of the console do not function properly

SOLUTION: a. Remove the key from the console and UNPLUG THE POWER CORD. Remove the Screws (58) from the Hood (1), and carefully pivot the Hood off.

a

58

1

Locate the Reed Switch (10) and the Magnet (18) on the left side of the Pulley (17). Turn the Pulley until the Magnet is aligned with the Reed Switch. Make sure that the gap between the Magnet and the Reed Switch is about 1/8”. If necessary, loosen the Screw (58), move the Reed Switch slightly, and then retighten the Screw. Reattach the Hood, and run the treadmill for a few minutes to check for a correct speed reading.

1/8”

17

58

 

10

18

Top

 

View

 

16

Image 16
Contents Assembly Operation Maintenance Part List and Drawing Model No Serial NoTable of Contents Important Precautions Page Right Side Before YOU BeginBack Assembly Make sure that the power cord is unpluggedPage Crossbar Do not overtighten the Screws HOW to Plug in the Power Cord Operation and AdjustmentPRE-LUBRICATED Walking Belt Console Diagram STEP-BY-STEP Console OperationInsert the key into the console Pressbelt. the Speed + button to start the walkingChange the incline of the treadmill as desired Pulse display -ThisTime/Distance display-This display Measure your heart rate if desiredHOW to USE the Upper Body Arms HOW to Fold the Treadmill for Storage HOW to Fold and Move the TreadmillHOW to Move the Treadmill HOW to Lower the Treadmill for USE Problem The power turns off during use TroubleshootingTop Problem The walking belt slows when walked on Conditioning Guidelines Exercise IntensityWorkout Guidelines Exercise FrequencySuggested Stretches Key Qty Description If a part is missing, call toll-freeExploded DRAWING-Model No Full 90 DAY Warranty Sears, Roebuck and Co., Dept WA, Hoffman Estates, IL

831.295033 specifications

The ProForm 831.295033 is a versatile and feature-rich treadmill designed for fitness enthusiasts seeking an efficient workout solution at home. One of its standout features is the FOLD Design, which allows for easy storage when not in use. This functionality is particularly advantageous for those with limited space in their workout area, as it can be conveniently folded and tucked away.

Equipped with a 2.5 HP motor, the ProForm 831.295033 provides a smooth and consistent running experience, capable of supporting various workout intensities. Whether you're engaging in a leisurely walk or a vigorous run, the treadmill can handle your needs. The device also boasts an impressive maximum speed of 10 mph, enabling users to challenge themselves and increase their performance gradually.

One of the main highlights of the ProForm 831.295033 is its adjustable incline feature. Users can increase the incline up to 10% to simulate the intensity of outdoor hill running, thus engaging different muscle groups and enhancing the overall workout experience. This feature not only contributes to a more challenging routine but also helps in calorie burning and muscle toning.

The treadmill is equipped with a large, well-cushioned running surface, which is vital for comfort during extended workout sessions. The ProForm 831.295033 features an 18-inch x 50-inch belt size, ensuring ample space for runners to stride freely without feeling restricted.

In terms of technology, the ProForm 831.295033 integrates with various fitness apps, allowing users to track their progress and goals seamlessly. It features a built-in display that provides essential stats such as speed, distance, and calories burned, enabling users to keep track of their fitness journey effectively. Additionally, it often comes with integrated speakers for connectivity with music devices, making workouts more enjoyable.

Durability is another characteristic of the ProForm 831.295033, as it is constructed with high-quality materials to withstand intense usage. The treadmill also includes safety features like an emergency stop button, ensuring a secure workout environment. Overall, the ProForm 831.295033 is a reliable choice for anyone seeking a comprehensive treadmill that combines practicality, technology, and performance in one package.