JVC RX-7000VBK manual Getting Started, Before Installation, Checking the Supplied Accessories

Page 5

Getting Started

This section explains how to connect audio/video components and speakers to the receiver, and how to connect the power supply.

Before Installation

General

•Be sure your hands are dry.

•Turn the power off to all components.

•Read the manuals supplied with the components you are going to connect.

Locations

•Install the receiver in a location that is level and protected from moisture.

•The temperature around the receiver must be between –5˚ C and 35˚ C (23˚ F and 95˚ F).

•Make sure there is good ventilation around the receiver. Poor ventilation could cause overheating and damage the receiver.

Handling the receiver

•Do not insert any metal object into the receiver.

•Do not disassemble the receiver or remove screws, covers, or cabinet.

•Do not expose the receiver to rain or moisture.

Checking the Supplied Accessories

Check to be sure you have all of the following items, which are supplied with the receiver.

The number in the parentheses indicates quantity of the pieces supplied.

•Remote Control (1)

•Batteries (2)

•AM Loop Antenna (1)

•FM Antenna (1)

If anything is missing, contact your dealer immediately.

Connecting the FM and AM

Antennas

FM Antenna Connections

A

ANTENNA

75

B

 

ANTENNA

75

 

FMAXIAL

 

 

FMAXIAL

 

 

CO

 

 

 

CO

 

AM

AM

 

AM

 

AM

 

LOOP

EXT

 

LOOP

 

EXT

 

 

 

 

 

 

 

 

FM Antenna

 

 

 

ANTENNA

 

Extend the supplied FM antenna horizontally.

 

FM 75

 

 

 

 

 

 

COAXIAL

 

 

 

 

AM

Outdoor FM Antenna Cable

LOOP

AM

EXT

A. Using the Supplied FM Antenna

The FM antenna provided can be connected to the FM 75Ω COAXIAL terminal as temporary measure.

B. Using the Standard Type Connector (Not Supplied)

A standard type connector should be connected to the FM 75Ω COAXIAL terminal.

Note:

If reception is poor, connect the outdoor antenna.

Before attaching a 75Ω coaxial cable (the kind with a round wire going to an outdoor antenna), disconnect the supplied FM antenna.

3

Page 4 Page 6
Image 5
Page 4 Page 6
Contents RX-7000VBK For U.S.A Table of Contents Front Panel Remote ControlParts Identification Checking the Supplied Accessories Before InstallationConnecting the FM and AM Antennas Getting StartedBasic connecting procedure Connecting the SpeakersConnecting the front speakers AM Antenna ConnectionsConnecting the rear and center speakers Connecting Audio/Video ComponentsConnecting the subwoofer speaker About the speaker impedanceVideo component connections CD playerTo audio input Cassette deck To audio output MD recorder To audio outputDVD player When you connect the DVD player with stereo output jacksDBS tuner To composite video outputMD recorder, etc Digital connectionsDBS tuner DVD player CD player MD recorderPutting Batteries in the Remote Control Connecting the Power CordPlug the power cord into an AC outlet R6PSUM-3/AA15FFrom the remote control Turning the Power On and Off StandbyBasic Operations Selecting the Source to PlaySelecting the Front Speakers Adjusting the VolumeEtc Turn Source Selector toAdjusting the Subwoofer Output Level Attenuating the Input SignalMuting the Sound Reinforcing the BassAdjusting the Front Speaker Output Balance Basic SettingsRecording a Source Changing the Source NamePress Setting repeatedly until Setting the Subwoofer InformationSetting the Speakers for the DSP Modes Turn Multi JOG to select Delay time of the rear speakerOutput Frequency appears on the displaySelecting the Analog or Digital Input Mode Digital Input Digital in Terminal SettingShowing the Text Information on Display Using the Sleep TimerReceiving Radio Broadcasts Tuning in Stations Manually Using Preset TuningTurn Source Selector to select the band FM or AM Press TUNER/SEA MemorySelecting the FM Reception Mode Assigning Names to Preset StationsCreating Your Own SEA Mode Using the SEA ModesSelecting Your Favorite SEA Mode Press SEA Adjust repeatedlyDAP modes Using the DSP Modes3D-PHONIC modes Surround modes DVD Multi Playback ModeDolby Surround Dolby Digital and Dolby Pro Logic DTS Digital SurroundFront Available DSP Modes According to the Speaker Arrangement3D Theater Live Club Dance Club Hall Pavilion 3D Action Hall Theater Pavilion Live Club 3D Action Dance ClubAdjusting the DAP Modes Adjusting the 3D-PHONIC ModesAdjusting the Surround Modes Repeatedly until Theater JVC Theater Surround adjustmentsÙ PRO Logic and DSP indicators also light up on the display Activating the DSP Modes To cancel the Dolby/DTS Surround modeSelect and play a sound source To enjoy Dolby Pro Logic, play back a software encoded withRepeatedly until the DSP mode you Mode you want appears on DisplayTo cancel the DSP mode Want appears on the displayActivating the DVD Multi Playback Mode Using the DVD Multi Playback ModePress DVD Multi so that DVD Multi appears on the displayWhen you finish, press Exit Using the On-Screen MenusPress Menu Press %/ Þto move to Visual@/ # Press %/ Þto move to Sound CONTROL, then press @/ #Selecting Your Favorite SEA Mode Adjusting the DVD Multi Playback ModeCreating Your Own SEA Mode Press %/ Þto move to Surround LEVEL, then press @/ #Press SET to store the setting into the SEA Usermode Press %/ Þ/ @/ #to adjust the SEA mode as you wantPress %/ Þto move To SETTING, then press @/ # Setting the Basic Setting Items Also seeStoring the Preset Stations Also see Press %/ Þto move to Preset NAME, then press SETAssigning Names to Preset Stations Press %/ Þ / @/ #to Move in front of a character you wantRemote Control through the Remote Sensor on the Receiver Compu Link Remote Control SystemSame time Automatic Source SelectionDisplaying the Disc Information on the TV screen Text Compu Link Remote Control SystemDisc Search Only for CD Player Disc Title InputShowing the Disc Information on the TV Screen Press Text Display while CD or MD is selected as the sourceTo exit from the Disc information screen Disc Information screen appears on the TVPress %/ Þto move To SEARCH, then Press SET Press Text Display while CD is selected as the sourcePress %/ Þto move To Performer Then press SET Press SET againPress %/ Þto move To GENRE, then Press SET Press %/ Þto move to Search Then press SETPress %/ Þto move To Title INPUT, then press SET Entering the Disc InformationPress %/ Þto move to the genre you want, then press SET Press Text Display while MD is selected as the sourcePress %/ Þto move to Title Input Then press SET For the MD recorderOn the TV is RECEIVER/AMP AV Compu Link Remote Control SystemIf the AV Compu Link terminal Automatic Power On/Off Automatic Selection of TV’s Input ModeOne-Touch Video Play One-Touch DVD PlayOperating Audio Components Operating JVC’s Audio/Video ComponentsTuner Sound control section Amplifier7/P CD player-changerTurntable Cassette deckReturns to the beginning of the current or previous track Operating Video ComponentsDVD player Try to operate your TV by pressing TV Power Release TV PowerIf there are more than one code listed for your brand of TV Operating Other Manufacturers’ Video EquipmentRelease VCR Power Release CATV/DBS PowerTry to operate your VCR by pressing VCR Power Try to operate your Catv converter by pressingProblem Possible Cause Solution TroubleshootingAmplifier SpecificationsAudio VideoFM tuner IHF Tuning Range Usable Sensitivity Signal-to-Noise RatioAM tuner General1099 781 954 650Valley Road Wayne, NJ Limited Warranty AUDIO-2 0100HIMMDWJEIN

RX-7000VBK specifications

The JVC RX-7000VBK is a powerful and versatile receiver that stands out in the realm of home audio systems. Designed for audiophiles and casual listeners alike, it seamlessly integrates various technologies to enhance the listening experience. With its sleek, modern design, the RX-7000VBK fits into any home decor while delivering exceptional sound quality.

One of the notable features of the RX-7000VBK is its robust amplification system. The receiver boasts a power output of 100 watts per channel across multiple channels, ensuring that it can drive a variety of speakers with ease. This makes it an ideal choice for both small and large living spaces. Additionally, the receiver supports up to 7.1 channels, providing an immersive surround sound experience that brings movies, music, and games to life.

The RX-7000VBK is equipped with advanced audio technologies that deliver high-fidelity sound. It features multi-channel digital signal processing (DSP) that optimizes audio quality by analyzing the sound and enhancing it according to the type of content being played. This results in crystal-clear dialogues, deep bass, and a balanced overall soundstage.

Connectivity is another highlight of the JVC RX-7000VBK. The receiver comes with multiple HDMI inputs, allowing users to connect several devices such as Blu-ray players, gaming consoles, and streaming devices. It supports 4K pass-through, ensuring that users can enjoy the latest video content in stunning detail. Additionally, there are standard audio inputs, including optical and coaxial digital inputs, for versatile connectivity with other devices.

In terms of user experience, the RX-7000VBK features an intuitive on-screen menu that simplifies setup and operation. The included remote control provides convenient access to all functions, including a dedicated button for direct sound mode selection, allowing users to switch between different sound presets easily.

Lastly, the JVC RX-7000VBK is designed with durability in mind. It is built with high-quality components that ensure longevity while delivering reliable performance over time. Overall, the JVC RX-7000VBK is an excellent choice for anyone seeking a high-quality AV receiver that combines powerful sound, ample connectivity, and user-friendly features in one sophisticated package.
Top Page Image Contents