JVC RX-7000VBK manual Troubleshooting, Problem Possible Cause Solution

Page 50

Troubleshooting

Use this chart to help you solve daily operational problems. If there is any problem you cannot solve, contact your JVC service center.

PROBLEM

POSSIBLE CAUSE

SOLUTION

 

 

 

The display does not light up.

The power cord is not plugged in.

Plug the power cord into an AC outlet.

 

 

 

No sound from speakers.

Speaker signal cables are not connected.

Check speaker wiring and reconnect if

 

 

necessary.

The SPEAKERS 1 and 2 buttons are not set correctly.

Press SPEAKERS 1 and 2 correctly.

An incorrect source is selected.

Select the correct source.

 

 

Muting is activated.

Press MUTING to cancel the mute.

Sound from one speaker only.

Speaker signal cables are not connected properly.

Check speaker wiring and reconnect if necessary.

The balance is set to one extreme.

Adjust the balance properly (see page 13).

Continuous hiss or buzzing during FM reception.

Incoming signal is too weak.

Connect an outdoor FM antenna or contact your dealer.

The station is too far away.

Select a new station.

An incorrect antenna is used.

Check with your dealer to be sure you have the correct antenna.

 

Antennas are not connected properly.

Check connections.

 

 

 

Occasional cracking noise during FM

Ignition noise from automobiles.

Move the antenna farther from automobile

reception.

 

traffic.

No colors on the on-screen display.

The color system of the connected TV is

Connect an NTSC TV.

not NTSC.

 

Howling during record playing.

Your turntable is too close to speakers.

Move speakers away from the turntable.

“OVERLOAD” starts flashing on the display.

Speakers are overloaded because of high volume.

1.Press POWER on the front panel to turn off the receiver.

2.Stop the playback source.

3.Turn on the receiver again, and adjust the volume.

Speakers are overloaded because of short circuit of speaker terminals.

Press POWER on the front panel, then check the speaker wiring.

If “OVERLOAD” does not disappear, unplug the AC power cord, then plug it back again.

If speaker wiring is not short-circuited, contact your dealer.

Remote control does not work.

The remote control mode selector is not

Set the selector correctly either to “AUDIO/

set correctly.

TV/VCR” or to “CATV/DBS.”

 

 

There is an obstruction in front of the

Remove the obstruction.

remote sensor on the receiver.

 

Batteries are weak.

Replace batteries.

 

 

48

Page 49 Page 51
Image 50
Page 49 Page 51
Contents RX-7000VBK For U.S.A Table of Contents Front Panel Remote ControlParts Identification Connecting the FM and AM Antennas Before InstallationChecking the Supplied Accessories Getting StartedConnecting the front speakers Connecting the SpeakersBasic connecting procedure AM Antenna ConnectionsConnecting the subwoofer speaker Connecting Audio/Video ComponentsConnecting the rear and center speakers About the speaker impedanceTo audio input Cassette deck To audio output CD playerVideo component connections MD recorder To audio outputDBS tuner When you connect the DVD player with stereo output jacksDVD player To composite video outputDBS tuner DVD player Digital connectionsMD recorder, etc CD player MD recorderPlug the power cord into an AC outlet Connecting the Power CordPutting Batteries in the Remote Control R6PSUM-3/AA15FBasic Operations Turning the Power On and Off StandbyFrom the remote control Selecting the Source to PlayEtc Adjusting the VolumeSelecting the Front Speakers Turn Source Selector toMuting the Sound Attenuating the Input SignalAdjusting the Subwoofer Output Level Reinforcing the BassRecording a Source Basic SettingsAdjusting the Front Speaker Output Balance Changing the Source NamePress Setting repeatedly until Setting the Subwoofer InformationSetting the Speakers for the DSP Modes Output Delay time of the rear speakerTurn Multi JOG to select Frequency appears on the displayDigital Input Digital in Terminal Setting Selecting the Analog or Digital Input ModeUsing the Sleep Timer Showing the Text Information on DisplayTurn Source Selector to select the band FM or AM Tuning in Stations Manually Using Preset TuningReceiving Radio Broadcasts Press TUNER/SEA MemoryAssigning Names to Preset Stations Selecting the FM Reception ModeSelecting Your Favorite SEA Mode Using the SEA ModesCreating Your Own SEA Mode Press SEA Adjust repeatedlyDAP modes Using the DSP Modes3D-PHONIC modes Dolby Surround Dolby Digital and Dolby Pro Logic DVD Multi Playback ModeSurround modes DTS Digital Surround3D Theater Live Club Dance Club Hall Pavilion 3D Action Available DSP Modes According to the Speaker ArrangementFront Hall Theater Pavilion Live Club 3D Action Dance ClubAdjusting the 3D-PHONIC Modes Adjusting the DAP ModesAdjusting the Surround Modes Repeatedly until Theater JVC Theater Surround adjustmentsÙ PRO Logic and DSP indicators also light up on the display Select and play a sound source To cancel the Dolby/DTS Surround modeActivating the DSP Modes To enjoy Dolby Pro Logic, play back a software encoded withTo cancel the DSP mode Mode you want appears on DisplayRepeatedly until the DSP mode you Want appears on the displayPress DVD Multi so that DVD Using the DVD Multi Playback ModeActivating the DVD Multi Playback Mode Multi appears on the displayPress Menu Using the On-Screen MenusWhen you finish, press Exit Press %/ Þto move to VisualPress %/ Þto move to Sound CONTROL, then press @/ # @/ #Creating Your Own SEA Mode Adjusting the DVD Multi Playback ModeSelecting Your Favorite SEA Mode Press %/ Þto move to Surround LEVEL, then press @/ #Press %/ Þto move To SETTING, then press @/ # Press %/ Þ/ @/ #to adjust the SEA mode as you wantPress SET to store the setting into the SEA Usermode Setting the Basic Setting Items Also seeAssigning Names to Preset Stations Press %/ Þto move to Preset NAME, then press SETStoring the Preset Stations Also see Press %/ Þ / @/ #to Move in front of a character you wantSame time Compu Link Remote Control SystemRemote Control through the Remote Sensor on the Receiver Automatic Source SelectionDisc Search Only for CD Player Text Compu Link Remote Control SystemDisplaying the Disc Information on the TV screen Disc Title InputTo exit from the Disc information screen Press Text Display while CD or MD is selected as the sourceShowing the Disc Information on the TV Screen Disc Information screen appears on the TVPress %/ Þto move To Performer Then press SET Press Text Display while CD is selected as the sourcePress %/ Þto move To SEARCH, then Press SET Press SET againPress %/ Þto move To Title INPUT, then press SET Press %/ Þto move to Search Then press SETPress %/ Þto move To GENRE, then Press SET Entering the Disc InformationPress %/ Þto move to Title Input Then press SET Press Text Display while MD is selected as the sourcePress %/ Þto move to the genre you want, then press SET For the MD recorderOn the TV is RECEIVER/AMP AV Compu Link Remote Control SystemIf the AV Compu Link terminal One-Touch Video Play Automatic Selection of TV’s Input ModeAutomatic Power On/Off One-Touch DVD PlayTuner Operating JVC’s Audio/Video ComponentsOperating Audio Components Sound control section AmplifierTurntable CD player-changer7/P Cassette deckReturns to the beginning of the current or previous track Operating Video ComponentsDVD player If there are more than one code listed for your brand of TV Release TV PowerTry to operate your TV by pressing TV Power Operating Other Manufacturers’ Video EquipmentTry to operate your VCR by pressing VCR Power Release CATV/DBS PowerRelease VCR Power Try to operate your Catv converter by pressingTroubleshooting Problem Possible Cause SolutionAudio SpecificationsAmplifier VideoAM tuner Tuning Range Usable Sensitivity Signal-to-Noise RatioFM tuner IHF General1099 781 954 650Valley Road Wayne, NJ Limited Warranty AUDIO-2 0100HIMMDWJEIN

RX-7000VBK specifications

The JVC RX-7000VBK is a powerful and versatile receiver that stands out in the realm of home audio systems. Designed for audiophiles and casual listeners alike, it seamlessly integrates various technologies to enhance the listening experience. With its sleek, modern design, the RX-7000VBK fits into any home decor while delivering exceptional sound quality.

One of the notable features of the RX-7000VBK is its robust amplification system. The receiver boasts a power output of 100 watts per channel across multiple channels, ensuring that it can drive a variety of speakers with ease. This makes it an ideal choice for both small and large living spaces. Additionally, the receiver supports up to 7.1 channels, providing an immersive surround sound experience that brings movies, music, and games to life.

The RX-7000VBK is equipped with advanced audio technologies that deliver high-fidelity sound. It features multi-channel digital signal processing (DSP) that optimizes audio quality by analyzing the sound and enhancing it according to the type of content being played. This results in crystal-clear dialogues, deep bass, and a balanced overall soundstage.

Connectivity is another highlight of the JVC RX-7000VBK. The receiver comes with multiple HDMI inputs, allowing users to connect several devices such as Blu-ray players, gaming consoles, and streaming devices. It supports 4K pass-through, ensuring that users can enjoy the latest video content in stunning detail. Additionally, there are standard audio inputs, including optical and coaxial digital inputs, for versatile connectivity with other devices.

In terms of user experience, the RX-7000VBK features an intuitive on-screen menu that simplifies setup and operation. The included remote control provides convenient access to all functions, including a dedicated button for direct sound mode selection, allowing users to switch between different sound presets easily.

Lastly, the JVC RX-7000VBK is designed with durability in mind. It is built with high-quality components that ensure longevity while delivering reliable performance over time. Overall, the JVC RX-7000VBK is an excellent choice for anyone seeking a high-quality AV receiver that combines powerful sound, ample connectivity, and user-friendly features in one sophisticated package.
Top Page Image Contents