JVC RX-7000VBK FM tuner IHF, AM tuner, Tuning Range Usable Sensitivity Signal-to-Noise Ratio

Page 52

FM tuner (IHF)

Tuning Range:

Usable Sensitivity:

50 dB Quieting Sensitivity:

Signal-to-Noise Ratio (IHF-A weighted):

Total Harmonic Distortion:

Stereo Separation at REC OUT:

Alternate Channel Selectivity:

Frequency Response:

AM tuner

Tuning Range:

Usable Sensitivity:

Signal-to-Noise Ratio

General

Power Requirements:

Power Consumption:

Dimensions (W x H x D):

Mass:

87.5 MHz to 108.0 MHz
Monaural:	12.8 dBf (1.2 µV/75	Ω)
Monaural:	21.3 dBf (3.2 µV/75	Ω)
Stereo:	41.3 dBf (31.5 µV/75	Ω)
Monaural:	78 dB at 85 dBf
Stereo:	73 dB at 85 dBf
Monaural:	0.4% at 1 kHz
Stereo:	0.6% at 1 kHz

35 dB at 1 kHz

45 dB: (±400 kHz)

30 Hz to 15 kHz: (+0.5 dB, –3 dB)

530 kHz to 1,710 kHz

Loop antenna	400 µV/m
	50 dB (100 mV/m)

AC 120V , 60 Hz

320 watts/420 VA (at operation)

2 watts (in standby mode)

435 mm x 157 mm x 412.5 mm (17 3/16 in. x 6 3/16 in. x 16 1/4 in.)

11.9 kg (26.3 lbs)

Designs & specifications are subject to change without notice.

Image 52

Contents RX-7000VBK For U.S.A Table of Contents Parts Identification Remote ControlFront Panel Before Installation Checking the Supplied AccessoriesConnecting the FM and AM Antennas Getting StartedConnecting the Speakers Basic connecting procedureConnecting the front speakers AM Antenna ConnectionsConnecting Audio/Video Components Connecting the rear and center speakersConnecting the subwoofer speaker About the speaker impedanceCD player Video component connectionsTo audio input Cassette deck To audio output MD recorder To audio outputWhen you connect the DVD player with stereo output jacks DVD playerDBS tuner To composite video outputDigital connections MD recorder, etcDBS tuner DVD player CD player MD recorderConnecting the Power Cord Putting Batteries in the Remote ControlPlug the power cord into an AC outlet R6PSUM-3/AA15FTurning the Power On and Off Standby From the remote controlBasic Operations Selecting the Source to PlayAdjusting the Volume Selecting the Front SpeakersEtc Turn Source Selector toAttenuating the Input Signal Adjusting the Subwoofer Output LevelMuting the Sound Reinforcing the BassBasic Settings Adjusting the Front Speaker Output BalanceRecording a Source Changing the Source NameSetting the Speakers for the DSP Modes Setting the Subwoofer InformationPress Setting repeatedly until Delay time of the rear speaker Turn Multi JOG to selectOutput Frequency appears on the displayDigital Input Digital in Terminal Setting Selecting the Analog or Digital Input ModeUsing the Sleep Timer Showing the Text Information on DisplayTuning in Stations Manually Using Preset Tuning Receiving Radio BroadcastsTurn Source Selector to select the band FM or AM Press TUNER/SEA MemoryAssigning Names to Preset Stations Selecting the FM Reception ModeUsing the SEA Modes Creating Your Own SEA ModeSelecting Your Favorite SEA Mode Press SEA Adjust repeatedly3D-PHONIC modes Using the DSP ModesDAP modes DVD Multi Playback Mode Surround modesDolby Surround Dolby Digital and Dolby Pro Logic DTS Digital SurroundAvailable DSP Modes According to the Speaker Arrangement Front3D Theater Live Club Dance Club Hall Pavilion 3D Action Hall Theater Pavilion Live Club 3D Action Dance ClubAdjusting the 3D-PHONIC Modes Adjusting the DAP ModesAdjusting the Surround Modes Ù PRO Logic and DSP indicators also light up on the display JVC Theater Surround adjustmentsRepeatedly until Theater To cancel the Dolby/DTS Surround mode Activating the DSP ModesSelect and play a sound source To enjoy Dolby Pro Logic, play back a software encoded withMode you want appears on Display Repeatedly until the DSP mode youTo cancel the DSP mode Want appears on the displayUsing the DVD Multi Playback Mode Activating the DVD Multi Playback ModePress DVD Multi so that DVD Multi appears on the displayUsing the On-Screen Menus When you finish, press ExitPress Menu Press %/ Þto move to VisualPress %/ Þto move to Sound CONTROL, then press @/ # @/ #Adjusting the DVD Multi Playback Mode Selecting Your Favorite SEA ModeCreating Your Own SEA Mode Press %/ Þto move to Surround LEVEL, then press @/ #Press %/ Þ/ @/ #to adjust the SEA mode as you want Press SET to store the setting into the SEA UsermodePress %/ Þto move To SETTING, then press @/ # Setting the Basic Setting Items Also seePress %/ Þto move to Preset NAME, then press SET Storing the Preset Stations Also seeAssigning Names to Preset Stations Press %/ Þ / @/ #to Move in front of a character you wantCompu Link Remote Control System Remote Control through the Remote Sensor on the ReceiverSame time Automatic Source SelectionText Compu Link Remote Control System Displaying the Disc Information on the TV screenDisc Search Only for CD Player Disc Title InputPress Text Display while CD or MD is selected as the source Showing the Disc Information on the TV ScreenTo exit from the Disc information screen Disc Information screen appears on the TVPress Text Display while CD is selected as the source Press %/ Þto move To SEARCH, then Press SETPress %/ Þto move To Performer Then press SET Press SET againPress %/ Þto move to Search Then press SET Press %/ Þto move To GENRE, then Press SETPress %/ Þto move To Title INPUT, then press SET Entering the Disc InformationPress Text Display while MD is selected as the source Press %/ Þto move to the genre you want, then press SETPress %/ Þto move to Title Input Then press SET For the MD recorderIf the AV Compu Link terminal AV Compu Link Remote Control SystemOn the TV is RECEIVER/AMP Automatic Selection of TV’s Input Mode Automatic Power On/OffOne-Touch Video Play One-Touch DVD PlayOperating JVC’s Audio/Video Components Operating Audio ComponentsTuner Sound control section AmplifierCD player-changer 7/PTurntable Cassette deckDVD player Operating Video ComponentsReturns to the beginning of the current or previous track Release TV Power Try to operate your TV by pressing TV PowerIf there are more than one code listed for your brand of TV Operating Other Manufacturers’ Video EquipmentRelease CATV/DBS Power Release VCR PowerTry to operate your VCR by pressing VCR Power Try to operate your Catv converter by pressingTroubleshooting Problem Possible Cause SolutionSpecifications AmplifierAudio VideoTuning Range Usable Sensitivity Signal-to-Noise Ratio FM tuner IHFAM tuner GeneralValley Road Wayne, NJ 781 954 6501099 Limited Warranty AUDIO-2 0100HIMMDWJEIN

RX-7000VBK specifications

The JVC RX-7000VBK is a powerful and versatile receiver that stands out in the realm of home audio systems. Designed for audiophiles and casual listeners alike, it seamlessly integrates various technologies to enhance the listening experience. With its sleek, modern design, the RX-7000VBK fits into any home decor while delivering exceptional sound quality.

One of the notable features of the RX-7000VBK is its robust amplification system. The receiver boasts a power output of 100 watts per channel across multiple channels, ensuring that it can drive a variety of speakers with ease. This makes it an ideal choice for both small and large living spaces. Additionally, the receiver supports up to 7.1 channels, providing an immersive surround sound experience that brings movies, music, and games to life.

The RX-7000VBK is equipped with advanced audio technologies that deliver high-fidelity sound. It features multi-channel digital signal processing (DSP) that optimizes audio quality by analyzing the sound and enhancing it according to the type of content being played. This results in crystal-clear dialogues, deep bass, and a balanced overall soundstage.

Connectivity is another highlight of the JVC RX-7000VBK. The receiver comes with multiple HDMI inputs, allowing users to connect several devices such as Blu-ray players, gaming consoles, and streaming devices. It supports 4K pass-through, ensuring that users can enjoy the latest video content in stunning detail. Additionally, there are standard audio inputs, including optical and coaxial digital inputs, for versatile connectivity with other devices.

In terms of user experience, the RX-7000VBK features an intuitive on-screen menu that simplifies setup and operation. The included remote control provides convenient access to all functions, including a dedicated button for direct sound mode selection, allowing users to switch between different sound presets easily.

Lastly, the JVC RX-7000VBK is designed with durability in mind. It is built with high-quality components that ensure longevity while delivering reliable performance over time. Overall, the JVC RX-7000VBK is an excellent choice for anyone seeking a high-quality AV receiver that combines powerful sound, ample connectivity, and user-friendly features in one sophisticated package.