ProForm 831.24745.1 Nut the Wheel must turn freely. Discard, Not fully fold the Frame yet

2. Remove the 3/8" Nut (8), the 3/8" x 2" Bolt (4),	2
and the shipping bracket (C) from the Base (80).
		Tie
Attach a Base Wheel (81) with the Bolt and the
Nut that you just removed. Do not overtighten		78
the Nut; the Wheel must turn freely. Discard		80
the shipping bracket.
Cut the tie off the Upright Wire (78).		4
		81
		C
		8
3. With the help of a second person, carefully tip	3
the treadmill onto its right side. Partially fold the		B
Frame (53) so the treadmill is more stable; do	A
not fully fold the Frame yet.
Remove and discard the two indicated bolts (A)
and the shipping bracket (B).		80
Attach a Base Pad (79) to the Base (80) in the lo-	79			53
cation shown with a Base Pad Spacer (25) and a				4
1" Tek Screw (56). Then, attach another Base	56
Pad (79) with only a 1" Tek Screw (56).
Remove the 3/8" Nut (8), the 3/8" x 2" Bolt (4),		25
and the shipping bracket (C) from the Base (80).				81
Attach a Base Wheel (81) with the Bolt and the
		56	79
Nut that you just removed. Do not overtighten				C
the Nut; the Wheel must turn freely. Discard				8
the shipping bracket.
4. With the help of a second person, carefully tip	4
the treadmill down so that the Base (80) is flat on
the floor.
Identify the Right Upright (72) and the Right	78
Upright Spacer (74), which are marked with
stickers. Insert the Upright Wire (78) through the
Right Upright Spacer as shown.
See the inset drawing. Tie the wire tie in the Right	Wire
	Tie
Upright (72) securely around the end of the
Upright Wire (78). Then, pull the other end of the
wire tie until the Upright Wire is routed com-	78
pletely through the Right Upright.	Wire	72		78
		72		80
	Tie
			74	Hole
	7