JVC RX-ES1SL manual Mises en garde, précautions et indications diverses, For Canada/pour Le Canada

Page 2

Warnings, Cautions and Others/

Mises en garde, précautions et indications diverses

 

 

CAUTION

 

 

 

RISK OF ELECTRIC SHOCK

 

 

 

DO NOT OPEN

 

 

 

 

 

 

 

 

 

CAUTION:

TO REDUCE THE RISK OF ELECTRIC SHOCK,

 

DO NOT REMOVE COVER (OR BACK).

 

NO USER SERVICEABLE PARTS INSIDE.

REFER SERVICING TO QUALIFIED SERVICE PERSONNEL.

The lightning flash with arrowhead symbol, within an equilateral triangle is intended to alert the user to the presence of uninsulated "dangerous voltage" within the product's enclosure that may be of sufficient magnitude to constitute a risk of electric shock to persons.

The exclamation point within an equilateral triangle is intended to alert the user to the presence of important operating and maintenance (servicing) instructions in the literature accompanying the appliance.

WARNING: TO REDUCE THE RISK OF FIRE OR ELECTRIC SHOCK, DO NOT EXPOSE THIS APPLIANCE TO RAIN OR MOISTURE.

CAUTION

To reduce the risk of electrical shocks, fire, etc.:

1.Do not remove screws, covers or cabinet.

2.Do not expose this appliance to rain or moisture.

ATTENTION

Afin d’éviter tout risque d’électrocution, d’incendie, etc.:

1.Ne pas enlever les vis ni les panneaux et ne pas ouvrir le coffret de l’appareil.

2.Ne pas exposer l’appareil à la pluie ni à l’humidité.

Caution –– switch!

Disconnect the mains plug to shut the power off completely. The

switch in any position does not disconnect the mains line. The power can be remote controlled.

Attention –– Commutateur !

Déconnecter la fiche de secteur pour couper complètement le

courant. Le commutateurne coupe jamais complètement la ligne de secteur, quelle que soit sa position. Le courant peut être télécommandé.

Note to CATV system installer:

This reminder is provided to call the CATV system installer’s attention to Section 820-40 of the NEC which provides guidelines for proper grounding and, in particular, specifies that the cable ground shall be connected to the grounding system of the building, as close to the point of cable entry as practical.

For Canada/pour le Canada

CAUTION: TO PREVENT ELECTRIC SHOCK, MATCH WIDE BLADE OF PLUG TO WIDE SLOT, FULLY INSERT ATTENTION: POUR EVITER LES CHOCS ELECTRIQUES, INTRODUIRE LA LAME LA PLUS LARGE DE LA FICHE DANS LA BORNE CORRESPONDANTE DE LA PRISE ET POUSSER JUSQUAU FOND

For Canada/pour Le Canada

THIS DIGITAL APPARATUS DOES NOT EXCEED THE CLASS B LIMITS FOR RADIO NOISE EMISSIONS FROM DIGITAL APPARATUS AS SET OUT IN THE INTERFERENCE-CAUSING EQUIPMENT STANDARD ENTITLED “DIGITAL APPARATUS,” ICES-003 OF THE DEPARTMENT OF COMMUNICATIONS. CET APPAREIL NUMERIQUE RESPECTE LES LIMITES DE BRUITS RADIOELECTRIQUES APPLICABLES AUX APPAREILS NUMERIQUES DE CLASSE B PRESCRITES DANS LA NORME SUR LE MATERIEL BROUILLEUR; “APPAREILS NUMERIQUES”, NMB-003 EDICTEE PAR LE MINISTRE DES COMMUNICATIONS.

Image 2
Contents RX-ES1SL Mises en garde, précautions et indications diverses For Canada/pour Le CanadaTable of Contents Remote control Parts identificationParts identification Front panelPutting batteries in the remote control Before installationChecking the supplied accessories Getting startedFM antenna connection Connecting the FM and AM antennasAM antenna connection Connecting the subwoofer Connecting the speakersSpeaker Layout Diagram Connecting the front, center, and surround speakersDVD player connection Connecting video componentsWhen connecting a DVD player with stereo output jacks Turn off all components before making connectionsVCR connection TV connection DBS tuner connectionDigital connection Connecting the power cordPlug the power cord into an AC outlet Digital coaxial cordSelecting the analog or digital input mode Turn on the powerTo turn off the power into standby Basic operationsListening with headphones Adjust the volumeSelecting the digital decode mode Always set the mode selectorTurning off the sounds temporarily- Muting TimerFrom the remote control only Press Sleep repeatedlySpeaker indicators light up as follows Basic adjustment of auto memorySignal and speaker indicators on the display Changing the display brightnessSpeaker settings TV/VCR/DBSPress SET to finish the setting Press SettingTurn Multi JOG until Quick Setup appears on the display Press SETWhen selecting Medium Room When selecting Large RoomLeft Basic settings Operating procedureSetting Auto Surround-AUTO SR Setting the video component input mode-DVD VIDEO/DBS VideoAdjusting the subwoofer output level Sound adjustmentsAdjusting the tone-BASS, Treble Press AdjustWhen using the remote control Press Bass Boost Adjusting the front speakers output balance-BALAttenuating the input signal-ATT Reinforcing the bass-B.BOOSTFrom the remote control only Press FM/AM to select the band Tuning in to stations manuallyUsing preset tuning Tuner operationsFrom the remote control Press FM/AM to select the band Selecting the FM reception modeTo tune in a preset station Press Tuner PresetIntroducing the Surround/DSP modes Creating realistic sound fieldsReproducing theater ambience Surround modesAll Channel Stereo DSP Digital Signal Processor modesDAP Digital Acoustic Processor modes Press Surround to select an appropriate Surround mode Using Surround modesFrom the remote control Select and play software you likePress Test again to stop the test tone Turn Multi JOG to select an appropriate surround modePress Test to check the speakers output balance Press SurroundAlways set the mode selector to AUDIO/TV/VCR/DBS Using DSP modesRepeat steps 5 and 6 to adjust the other settings To cancel Surround modeTo cancel DSP Modes Effect available only for DAP modes *2From the remote control Press DVD Multi Using the DVD Multi playback modeAdjusting the speaker output level Turn Source Selector until DVD Multi appears on the displayVideo input using composite video cords AV Compu Link remote control systemTV’s Video Input 1 terminal using S-video cords Connections 2 Video Cable ConnectionOne-touch video play Automatic selection of TV’s input modeAutomatic power On/Off One-touch DVD playOperating other JVC products DVD playerManufacturers’ codes for Catv converter Operating other manufacturers’ equipmentDBS Manufacturers’ codes for DBS tunerChanging the transmittable signals for operating a Manufacturers’ codes for VCRIf more than one codes are listed for your brand of TV, try Changing the transmittable signals for operating aTV VOL + Adjust the volume Manufacturers’ codes for TVGeneral TroubleshootingProblem Possible Cause Solution Surround/DSP FM/AMSpecifications RX-ES1SLLimited Warranty Authorized Service Centers  2003 Victor Company of JAPAN, Limited 0403NHMMDWJEIN AMPLI-TUNER Cinema Maison Mises en garde, précautions et indications diverses English English Parts identification Putting batteries in the remote control Connecting the FM and AM antennas Connecting the speakers Connecting video components English Connect using one Connecting the power cord English Adjust the volume Turning off the power with the Sleep When digital input is selected Lights up when the right Following signal indicators light upWhen digital input is selected Lights up when the left Speaker settings Initial setting USEFeet M 8 feet Feet M 8 feet Basic settings OFF Mode-DVD VIDEO/DBS VideoComp Sound adjustments Reinforcing the bass-B.BOOST Tuner operations Selecting the FM reception mode Introducing the Surround/DSP modes Creating realistic sound fields See pages 15 to About relations between speaker layout Using Surround modesSurround/DSP modes Lpcm Subwfr VOL Surr R*1 CENTER*1Surr L*1 Effect 3 Effect 4 Effect Effect 2 Effect Using the DVD Multi playback mode AV Compu Link remote control system cannot control the DBS AV Compu Link remote control system Operating other JVC products Operating other manufacturers’ equipment Operating other manufacturers’ equipment Try to operate your TV by pressing TV General Troubleshooting Specifications EN, FR
Related manuals
Manual 76 pages 34.39 Kb

RX-ES1SL specifications

The JVC RX-ES1SL is a compact and versatile stereo receiver designed to cater to the audio needs of home entertainment enthusiasts. Known for its excellent sound quality and user-friendly features, it presents an ideal solution for those who seek an integration of traditional and modern audio technologies.

One of the standout features of the RX-ES1SL is its power output, which delivers a robust 100 Watts per channel. This ensures that listeners can enjoy rich, clear audio across a variety of listening environments, whether in a small room or a larger space. The receiver is designed to drive both high-efficiency bookshelf speakers as well as larger floor-standing models, making it adaptable to various setups.

Incorporating advanced audio technologies, the RX-ES1SL features a built-in Digital Signal Processor (DSP), which enhances audio performance through various sound modes and effects. This allows users to customize their listening experience, whether they're watching movies, playing video games, or enjoying music. The receiver also supports several audio formats, ensuring compatibility with different devices and media types.

Connectivity is another strong point of the JVC RX-ES1SL. It includes multiple inputs, such as RCA for analog sources, and an optical input for digital audio connections. Additionally, it has AM/FM radio capabilities, allowing users to tune into their favorite stations easily. The USB port offers convenience for connecting external storage devices, providing direct playback of digital files without needing an additional player.

Aesthetically, the RX-ES1SL features a sleek design that fits into various decors. Its compact footprint makes it suitable for smaller spaces or as part of a larger home theater system. The user-friendly interface, complete with a remote control, simplifies operation and enhances the overall user experience.

For music lovers, the JVC RX-ES1SL is equipped with a high-performance tuner, ensuring clear reception of AM and FM signals. It also features a highly accurate frequency response that enables a wide dynamic range, delivering nuanced audio that can bring both music and soundtracks to life.

In summary, the JVC RX-ES1SL is a well-rounded stereo receiver that combines robust audio performance with modern connectivity options. Its ability to adapt to various audio sources, coupled with a compact design and user-friendly interface, makes it an excellent choice for anyone looking to enhance their home audio experience. Whether you are a casual listener or a dedicated audiophile, the RX-ES1SL is equipped to satisfy your audio cravings.