JVC RX-ES1SL manual Surround/DSP, Fm/Am

Page 41

Troubleshooting

 

PROBLEM

POSSIBLE CAUSE

SOLUTION

Surround mode cannot be selected.

Surround mode is not available on the

Play not multi-channel software or

 

 

software being played back, or only the

check the speaker setting.

 

 

front speakers are set for use.

 

 

 

 

DSP mode cannot be selected.

DSP mode is not available on the

Play back Linear PCM or analog software or

 

 

software being played back, or only the

check the speaker setting.

 

 

front speakers are set for use.

 

Continuous hiss or buzzing during FM

Incoming signal is too weak.

Connect an outdoor FM antenna or contact your

reception.

 

dealer.

 

 

 

 

 

 

The station is too far away.

Select a new station.

 

 

 

 

 

 

An incorrect antenna is used.

Check with your dealer to be sure you have the

 

 

 

correct antenna.

 

 

 

 

 

 

Antennas are not connected properly.

Check connections.

 

 

 

 

Occasional cracking noise during FM

Ignition noise from automobiles.

Move the antenna farther from automobile traffic.

reception.

 

 

 

 

 

NOTE

 

 

 

 

 

 

 

Surround/DSP

FM/AM

When you use the digital coaxial connection, the sounds may be intermittently distorted by the outside noise such as a lightning discharge but they will restore automatically. This is not a malfunction.

39

Page 40 Page 42
Image 41
Page 40 Page 42
Contents RX-ES1SL For Canada/pour Le Canada Mises en garde, précautions et indications diversesTable of Contents Parts identification Remote controlFront panel Parts identificationChecking the supplied accessories Before installationPutting batteries in the remote control Getting startedFM antenna connection Connecting the FM and AM antennasAM antenna connection Speaker Layout Diagram Connecting the speakersConnecting the subwoofer Connecting the front, center, and surround speakersWhen connecting a DVD player with stereo output jacks Connecting video componentsDVD player connection Turn off all components before making connectionsVCR connection DBS tuner connection TV connectionPlug the power cord into an AC outlet Connecting the power cordDigital connection Digital coaxial cordTo turn off the power into standby Turn on the powerSelecting the analog or digital input mode Basic operationsSelecting the digital decode mode Adjust the volumeListening with headphones Always set the mode selectorFrom the remote control only TimerTurning off the sounds temporarily- Muting Press Sleep repeatedlySignal and speaker indicators on the display Basic adjustment of auto memorySpeaker indicators light up as follows Changing the display brightnessTV/VCR/DBS Speaker settingsTurn Multi JOG until Quick Setup appears on the display Press SettingPress SET to finish the setting Press SETWhen selecting Large Room When selecting Medium RoomLeft Operating procedure Basic settingsSetting the video component input mode-DVD VIDEO/DBS Video Setting Auto Surround-AUTO SRAdjusting the tone-BASS, Treble Sound adjustmentsAdjusting the subwoofer output level Press AdjustAttenuating the input signal-ATT Adjusting the front speakers output balance-BALWhen using the remote control Press Bass Boost Reinforcing the bass-B.BOOSTUsing preset tuning Tuning in to stations manuallyFrom the remote control only Press FM/AM to select the band Tuner operationsTo tune in a preset station Selecting the FM reception modeFrom the remote control Press FM/AM to select the band Press Tuner PresetReproducing theater ambience Creating realistic sound fieldsIntroducing the Surround/DSP modes Surround modesAll Channel Stereo DSP Digital Signal Processor modesDAP Digital Acoustic Processor modes From the remote control Using Surround modesPress Surround to select an appropriate Surround mode Select and play software you likePress Test to check the speakers output balance Turn Multi JOG to select an appropriate surround modePress Test again to stop the test tone Press SurroundRepeat steps 5 and 6 to adjust the other settings Using DSP modesAlways set the mode selector to AUDIO/TV/VCR/DBS To cancel Surround modeEffect available only for DAP modes *2 To cancel DSP ModesAdjusting the speaker output level Using the DVD Multi playback modeFrom the remote control Press DVD Multi Turn Source Selector until DVD Multi appears on the displayTV’s Video Input 1 terminal using S-video cords AV Compu Link remote control systemVideo input using composite video cords Connections 2 Video Cable ConnectionAutomatic power On/Off Automatic selection of TV’s input modeOne-touch video play One-touch DVD playDVD player Operating other JVC productsDBS Operating other manufacturers’ equipmentManufacturers’ codes for Catv converter Manufacturers’ codes for DBS tunerManufacturers’ codes for VCR Changing the transmittable signals for operating aTV VOL + Adjust the volume Changing the transmittable signals for operating aIf more than one codes are listed for your brand of TV, try Manufacturers’ codes for TVGeneral TroubleshootingProblem Possible Cause Solution FM/AM Surround/DSPRX-ES1SL SpecificationsLimited Warranty Authorized Service Centers  2003 Victor Company of JAPAN, Limited 0403NHMMDWJEIN AMPLI-TUNER Cinema Maison Mises en garde, précautions et indications diverses English English Parts identification Putting batteries in the remote control Connecting the FM and AM antennas Connecting the speakers Connecting video components English Connect using one Connecting the power cord English Adjust the volume Turning off the power with the Sleep When digital input is selected Lights up when the right Following signal indicators light upWhen digital input is selected Lights up when the left Speaker settings USE Initial settingFeet M 8 feet Feet M 8 feet Basic settings OFF Mode-DVD VIDEO/DBS VideoComp Sound adjustments Reinforcing the bass-B.BOOST Tuner operations Selecting the FM reception mode Introducing the Surround/DSP modes Creating realistic sound fields See pages 15 to About relations between speaker layout Using Surround modesSurround/DSP modes Lpcm Subwfr VOL Surr R*1 CENTER*1Surr L*1 Effect 3 Effect 4 Effect Effect 2 Effect Using the DVD Multi playback mode AV Compu Link remote control system cannot control the DBS AV Compu Link remote control system Operating other JVC products Operating other manufacturers’ equipment Operating other manufacturers’ equipment Try to operate your TV by pressing TV General Troubleshooting Specifications EN, FR
Related manuals
Manual 76 pages 34.39 Kb

RX-ES1SL specifications

The JVC RX-ES1SL is a compact and versatile stereo receiver designed to cater to the audio needs of home entertainment enthusiasts. Known for its excellent sound quality and user-friendly features, it presents an ideal solution for those who seek an integration of traditional and modern audio technologies.

One of the standout features of the RX-ES1SL is its power output, which delivers a robust 100 Watts per channel. This ensures that listeners can enjoy rich, clear audio across a variety of listening environments, whether in a small room or a larger space. The receiver is designed to drive both high-efficiency bookshelf speakers as well as larger floor-standing models, making it adaptable to various setups.

Incorporating advanced audio technologies, the RX-ES1SL features a built-in Digital Signal Processor (DSP), which enhances audio performance through various sound modes and effects. This allows users to customize their listening experience, whether they're watching movies, playing video games, or enjoying music. The receiver also supports several audio formats, ensuring compatibility with different devices and media types.

Connectivity is another strong point of the JVC RX-ES1SL. It includes multiple inputs, such as RCA for analog sources, and an optical input for digital audio connections. Additionally, it has AM/FM radio capabilities, allowing users to tune into their favorite stations easily. The USB port offers convenience for connecting external storage devices, providing direct playback of digital files without needing an additional player.

Aesthetically, the RX-ES1SL features a sleek design that fits into various decors. Its compact footprint makes it suitable for smaller spaces or as part of a larger home theater system. The user-friendly interface, complete with a remote control, simplifies operation and enhances the overall user experience.

For music lovers, the JVC RX-ES1SL is equipped with a high-performance tuner, ensuring clear reception of AM and FM signals. It also features a highly accurate frequency response that enables a wide dynamic range, delivering nuanced audio that can bring both music and soundtracks to life.

In summary, the JVC RX-ES1SL is a well-rounded stereo receiver that combines robust audio performance with modern connectivity options. Its ability to adapt to various audio sources, coupled with a compact design and user-friendly interface, makes it an excellent choice for anyone looking to enhance their home audio experience. Whether you are a casual listener or a dedicated audiophile, the RX-ES1SL is equipped to satisfy your audio cravings.
Top Page Image Contents