ProForm PFTL14511.0 warranty All four Bolts, and then tighten each, Them

Page 11

11. Set the console assembly on the Right Handrail	11
(87) and the Left Handrail (88). Be careful not	11				Console
to pinch any wires. Insert the excess Upright					Console
Wire (not shown) into the Left Handrail.					Assembly
Attach the console assembly with six #8 x 1/2"
Screws (1) and four 1/4" x 1/2" Bolts (36) with
four 5/16" Flat Washers (113) and four 1/4" Star	35	87			35	88
Washers (35) as shown. Start all six Screws	35	87			35	88
and all four Bolts, and then tighten each of	113					113
them.	113	1	1	1	1	113
See step 7. Tighten the four 5/16" x 1" Bolts (5)	36	1	1	1	1	36
and the two 5/16" x 1 1/4" Bolts (4).
12. Tighten the four 3/8" x 2 3/4" Bolts (7) first and	12
then the four 3/8" x 1 1/4" Bolts (8) (only one	12					83
side is shown).						83
Press the Left Base Cover (82) and the Right
Base Cover (83) onto the Base (94) until they
snap into place.
	7
	8	94	82
			82
13. Slide the Left Handrail Cover (85) onto the Left	13
Handrail (88). Slide the Right Handrail Cover	13
(86) onto the Right Handrail (87). Attach each					86
Handrail Cover with a #8 x 1/2" Screw (1).					86	87
						87
					1
		85	88
		1
	11

Image 11

Contents On the WEB QUESTIONS?Model No. PFTL14511.0 Serial No Mon.-Fri a.m.-6 p.m. MT Sat a.m.-4 p.m. MTTable of Contents Important Precautions Instructions Save TheseBefore YOU Begin Wrench Scissors AssemblySee the inset drawing. Tie the wire tie Make sure that the power cord is unplugged Base Covers into place yet Be careful not to pinch the Upright Tighten the Bolts yet. Note It may be helpful Attach the Right Upright not shownAttach the Right Handrail 87 in the same way Again. if YOU do not Connect the CON Important To avoid damagingShown. Start all four Screws, and then tighten Each of them Them All four Bolts, and then tighten eachConsole Make sure the caps remain in the ends Storage Latch Page PRE-LUBRICATED Walking Belt Operation and AdjustmentHOW to Plug in the Power Cord Console DiagramFeatures of the Console HOW to SET UP the Console HOW to Turn on the PowerInsert the key into the console HOW to USE the Manual ModeBegin working out Page Turn on the fan if desired Measure your heart rate if desired. Before usingStart the workout HOW to USE AN Onboard WorkoutHOW to USE AN Ifit Live Workout Ifit Live FCC Information HOW to USE the Internet Browser Select the wireless network mode HOW to USE the Settings ModeSelect the unit of measurement Exit the settings modeLog in to your iFit Live account Select a languageSelect the settings mode. See on Select the maintenance mode HOW to USE the Maintenance ModeView technical information HOW to USE the Stereo Sound SystemHOW to Lower the Treadmill for USE HOW to Fold and Move the TreadmillHOW to Fold the Treadmill HOW to Move the TreadmillOutlets TroubleshootingProblem The power turns off during use Turn if the walking belt has shifted to the right Problem The walking belt slows when walked onTop Problem The buttons on the screen do not work correctly Problem The iFit Live mode does not function correctlyExercise Frequency Exercise GuidelinesExercise Intensity Workout GuidelinesKey No. Qty Description Part ListQty Exploded Drawing a Exploded Drawing B Exploded Drawing C Exploded Drawing D Icon Health & Fitness, Inc., 1500 S W., Logan, UT Ordering Replacement PartsLimited Warranty

Related manuals

Manual 40 pages 49.67 Kb