5. Hold a Bolt Spacer (88) inside the lower end of | 5 | 7 |
the Right Upright (83). Insert a 3/8" x 5 1/2" | ||
Patch Bolt (7) with a 3/8" Star Washer (11) into |
| 83 |
the Right Upright and the Bolt Spacer. Repeat |
| |
this step with a second Bolt Spacer (88), 3/8" |
|
|
x 5 1/2" Patch Bolt (7), and 3/8" Star Washer |
| 11 |
(11). |
| |
Hold the Right Upright (83) against the Right |
| 91 |
Upright Spacer (91). Be careful not to pinch |
|
|
the Upright Wire (85) or the ground wire. |
|
|
Tighten the 3/8" x 5 1/2" Patch Bolts (7) until the |
| 88 |
heads of the Patch Bolts touch the Right |
| |
Upright; do not fully tighten the Patch Bolts |
|
|
yet. |
|
|
6. With the help of a second person, carefully tip | 6 |
|
the treadmill onto its right side. Partially fold the |
| |
Frame (55) so that the treadmill is more stable; | 7 | 82 |
do not fully fold the Frame yet. | ||
See the inset drawing. Orient the Left Upright | 11 |
|
Spacer (90) with the two curved corners posi- |
| |
tioned as shown. Set the Left Upright Spacer on | 90 | 55 |
the Base (94). | ||
Hold a Bolt Spacer (88) inside the lower end of | 88 |
|
the Left Upright (82). Insert a 3/8" x 5 1/2" Patch |
| |
Bolt (7) with a 3/8" Star Washer (11) into the |
|
|
Left Upright and the Bolt Spacer. Repeat this | 94 |
|
step with a second Bolt Spacer (88), 3/8" x |
| |
5 1/2" Patch Bolt (7), and 3/8" Star Washer |
| 90 |
(11). |
| |
Hold the Left Upright (82) against the Left |
|
|
Upright Spacer (90). Tighten the 3/8" x 5 1/2" |
|
|
Patch Bolt (7) until the heads of the Patch Bolts |
|
|
touch the Upright; do not fully tighten the |
| Curved |
Patch Bolts yet. |
| |
|
| Corners |
| 9 |
|