THE INFORMATION MODE/DEMO MODE
The console features an information mode that keeps track of treadmill usage information and allows you to select a unit of measurement for the console.
To select the information mode, insert the key into the console while holding down the Stop button, and then release the Stop button. When the information mode is selected, the following information will be shown:
The left display will show the total number of hours that the treadmill has been used and the total number of miles (or kilometers) that the walking belt has moved.
An “E” (for English) or an “M” (for metric) will appear in the right display. Press the Speed increase button to change the unit of measure- ment, if desired.
IMPORTANT: If a “d” ap-
pears in the right display, the console is in the “demo” mode. This mode is intended
to be used only when a treadmill is displayed in a
store. When the console is in the demo mode, the power cord can be plugged in, the key can be removed from the console, and the displays will remain lit, al- though the buttons will not operate. If a “d” appears when the information mode is selected, press the Speed decrease button so the “d” disappears.
To exit the information mode, remove the key from the console.
12