Samsung DVD-VR350/XEH manual EZ REC Mode

Press “On” to confirm EZ REC mode.

Otherwise press “Off”

On Off

Disc Initialise (DVD-V)

Now, initialising..

50%

Disc Finalise

Processing..

50%

EZ REC MODE

DVD-VR355 only

This function allows you Initialise and Finalise a disc automatically.

1.With the unit in Stop mode/No Disc mode, press the EZ REC MODE button on the remote control.

2.Press the ◄ ► buttons to select On, and then press the OK button. The EZ REC MODE is set up.

3.Insert a disc.

If the disc is new, it will initialise automatically.

4.Press the REC button.

5.EZ REC MODE will Automatically Finalise the disc under the following conditions.

-When you press the OPEN/CLOSE button on your DVD Recorder & VCR after recording on at least 30% of the disc. The tray will open after the disc has been finalised.

-When the disc is full, it will finalise automatically and the DVD Recorder & VCR will remain in stop mode.

-When you make a timer recording and it occupies at least 30% of the disc, the disc will finalise automatically and the DVD Recorder & VCR will power off. Please note that auto finalisation will not work if the DVD Recorder & VCR has more than one Timer Recording set in the Scheduled Record List.

■ If you insert a new DVD-RW disc, it will be formatted in V mode after auto initialising.

■If you select off, you must initialise (see page 51) and finalise the disc manually in the Disc Manager menu.(see page 76)

■The length of Recording is different according to recording mode. (see page 51)

Recording

English - 59