Samsung DVD-VR350/XEH manual Setting the Date and Time, Auto Setup

DVD-Recorder								Clock Set
No Disc
Programme
Setup	Date				Time
	JAN
			01	2007		12	00
	MON
MOVE		OK		RETURN				EXIT

Auto Channel Memory

50%

Stop

Setting the Date and Time

Your DVD Recorder & VCR contains a 24-hour clock and calendar used to:

•Automatically stop a programme recording

•Preset your DVD Recorder & VCR to record a programme automatically

•You must set the date and time when you purchase the DVD Recorder & VCR.

•Do not forget to reset the time when you change clocks from winter to summer time and vice versa.

1. With the unit in Stop mode/No Disc mode, press the MENU button.

2. Press the ▲▼ buttons to select Setup, then press the OK or ► button.

3. Press the ▲▼ buttons to select Clock Set, then press the OK or ► button.

4. Press the ◄► buttons to select the hour, minutes, day, month and year.

• The selected item is highlighted.

5. Press the ▲▼ buttons to increase or decrease the value.

•The day of the week is displayed automatically.

•You can hold the ▲▼ buttons down to scroll more quickly through the values.

6. Press the OK button, then the date and time will be saved. If you don’t press the OK button, it will not be saved.

7. Press the EXIT button to exit the menu.

Auto Setup

You do not need to preset the stations if you have already set them automatically (See Plug & Auto Setup on page 22).

Your DVD Recorder & VCR contains a built-in tuner used to receive television broadcasts.

You must preset the stations received through the tuner. This can be done by:

•Plug & Auto Setup (See page 22)

•Auto Setup

•Manual Setup (See page 24)

1. With the unit in Stop mode/No Disc mode, press the MENU button.

2. Press the ▲▼ buttons to select Setup, then press the OK or ► button.

3. Press the ▲▼ buttons to select Install, then press the OK or ► button.

4. Press the ▲▼ buttons to select Auto Setup, then press the OK or ► button. The message “Your data will be lost. Press [OK] to continue, [MENU] to exit.” is displayed.

5. Press the OK button to start the auto scanning.

•The first frequency band is scanned and the station found first is displayed and stored.

The DVD Recorder & VCR then searches for the second station and so on.

•When the automatic scanning procedure has finished, the DVD Recorder & VCR switches automatically to programme 1.

•The number of stations automatically stored by the DVD Recorder & VCR depends on the number of stations that it has found.

6. If you wish to cancel the auto scanning before the end, press the OK button.

•Once the auto scanning procedure has finished, some stations may have been stored more than once; select the stations with the best reception and delete the ones no longer required.

System Setup

English - 23