Samsung DVD-VR350/XEH manual On-Screen Menu Navigation, Plug & Auto Setup, Buttons, OK Button

System Setup

On-Screen Menu Navigation

System Setup

DVD-Recorder			Setup
No Disc
Programme	System		►
Setup	Clock Set		►
	Language		►
	Audio		►
	Video		►
	Parental Control		►
	Install		►
MOVE	OK	RETURN	EXIT

The on-screen menus allow you to enable or disable various functions on your DVD Recorder & VCR.

Press the MENU button to open the on-screen menu and then use the following buttons to navigate through the on screen menus.

1.▲▼, ◄► Buttons

Press these buttons on the remote control to move the selection bar ▲ ▼, ◄► to cycle through the menu options.

2.OK Button

Press this button on the remote control to confirm any new settings.

3.RETURN Button

Press this button on the remote control to return to the previous menu screen displayed or to exit the on-screen menu.

4.EXIT Button

Press this button to exit the on-screen menu.

DVD-Recorder		Auto Setup
No Disc
Language Set		English
		Polski
		Magyar
		Česky
		Slovak
		Greek
		Bulgarian
MOVE	OK	RETURN

Auto Channel Memory

50%

Stop

DVD-Recorder						Auto Setup
No Disc
Date				Time
JAN
		01	2007		12	00
MON
MOVE	OK		RETURN

Plug & Auto Setup

The DVD Recorder & VCR will automatically set itself up when it is plugged into the mains for the first time.

TV stations will be stored in memory. The process takes a few minutes. The DVD Recorder & VCR will then be ready for use.

1. Connect the RF cable as indicated on page 16.

•Connecting Your DVD Recorder & VCR to the TV using the RF Cable and Scart cable (or Audio/Video cable).

2. Plug the DVD Recorder & VCR into the mains.

• “Auto” in the front panel display flickers.

3. Press the ▲▼ buttons select desired language, then press the OK button.

The message “Auto Setup will be started. Check antenna and TV cable connection.” is displayed.

4. Start the auto setup.

5. Start the auto scanning.

6. Check the date and time.

Refer to “Setting the Date and Time” to change the date and time. (See page 23)

English - 22