Samsung DVD-VR350/XEH manual For using Anynet+HDMI-CEC, TV Menu

System Setup

DVDR

View TV		Z
Select Device		Z
Record		Z
Menu on Device		Z
Device Operation		Z
Receiver	: Off	Z
Setup		Z
Move	Ok
Exit

TV Menu

For using Anynet+(HDMI-CEC)

1. Connect DVD Recorder & VCR to the TV by using HDMI cable. (See page 20)

2. Set the Anynet+(HDMI-CEC) to “On” on your DVD Recorder & VCR. (see above)

3. Set the Anynet+ function on your TV.

(See the TV instruction manual for more information.)

•You can operate the DVD Recorder & VCR by using TV remote control.

(TV buttons that can be used to control the DVD Recorder & VCR : , ,

,,,, and , buttons, ~ button)

•When you press Anynet+ button on the TV remote control, the OSD to the left will appear.

-Select Device: Use this option to select device.

-Record: Use this option to start recording or stop recording.

-Menu on Device : Same as MENU button ( ) on the DVD Recorder & VCR remote control.

-Device Operation : Same as ANYKEY button ( ) on the DVD Recorder & VCR remote control.

■ By pressing the PLAY button of the recorder while watching TV, the TV screen will change to the play screen.

■If you play a DVD when the TV power is off, the TV will power On.

■If you turn the TV off, the DVD Recorder & VCR will power off automatically.(When the DVD recorder & VCR is recording, it can't be powered off.)

■If you change the HDMI to other sources(Composite, Component, RF... etc) in TV while playing the DVD disc, the DVD Recorder & VCR will stop playing. The DVD Recorder & VCR may keep playing certain discs based on their content.

English - 34