Samsung DVD-VR350/XEH manual Connecting the Scart Cable

Connecting & Setting Up

Connecting & Setting Up

Connecting DVD Recorder & VCR to the TV using the RF Cable

■ Make sure that both the television and the DVD Recorder & VCR are switched off before connecting the cables.

1. Remove the aerial or network input cable from the television.

2. Connect this cable to the 75Ω aerial jack marked on the rear of your DVD Recorder & VCR.

3. Plug the RF Cable supplied into the jack on your DVD Recorder & VCR.

4. Plug the other end of the RF Cable into the connector previously used for the aerial on the television.

Connecting the SCART Cable

Case 1 : Connecting DVD Recorder & VCR to the TV using the SCART Cable

You can connect your DVD Recorder & VCR to the television using the SCART cable if the appropriate input is available on the television. You thus:

•Obtain better quality sound and pictures

•Simplify the setting up procedure of your DVD Recorder & VCR

■ Regardless of the type of connection chosen, you must always connect the RF Cable. Otherwise, no picture will be visible on the screen when the DVD Recorder & VCR is switched off.

■ To obtain better quality pictures and sound on	■ Make sure that both the television and the
your television, you can also connect your DVD	DVD Recorder & VCR are switched off before
Recorder & VCR to the television via the SCART	connecting the cables.
cable if your television equipped with type of	1. Connect the Aerial Cable.
connection.
	2. Connect one end of the SCART cable to the AV1 (TV)

jack on the rear of the DVD Recorder & VCR.

3. Plug the other end into the appropriate connector on the television.

To RF IN

Aerial

To RF OUT

SCART Cable

TV

ANT

RF Cable

To ANT INPUT

TV

ANT

RF Cable

English - 16