ProForm PCTL69030 user manual HOW to Fold the Treadmill for Storage, HOW to Move the Treadmill

Page 10

HOW TO FOLD AND MOVE THE TREADMILL

HOW TO FOLD THE TREADMILL FOR STORAGE

Before folding the treadmill, unplug the power cord.

CAUTION: You must be able to safely lift 20 kg (45 lbs.) in order to raise, lower, or move the treadmill.

1.Hold the treadmill with your hands in the locations shown at the right.To decrease the possibility of injury, bend your legs and keep your back straight. As you raise

the treadmill, make sure to lift with your legs rather

than your back. Raise the treadmill about halfway to the vertical position.

2.Move your right hand to the position shown and hold the treadmill firmly. Press out on the storage latch. Raise the treadmill until the storage latch closes over the catch.

Make sure that the storage latch is fully engaged over the catch.

To protect the floor or carpet from damage, place a mat under the treadmill. Keep the treadmill out of direct sunlight. Do not leave the treadmill in the stor- age position in temperatures above 30º C (85° F).

HOW TO MOVE THE TREADMILL

Before moving the treadmill, convert the treadmill to the

storage position as described above. Make sure that the storage latch is closed fully over the catch.

1.Hold the upper ends of the handrails. Place one foot on the base as shown.

2.Tilt the treadmill back until it rolls freely on the front wheels. Carefully move the treadmill to the desired loca- tion. To reduce the risk of injury, use extreme caution while moving the treadmill. Do not move the tread-

mill over an uneven surface.

3.Place one foot on the base, and carefully lower the treadmill until it is resting in the storage position.

Engaged

Storage

Latch

Catch

Base

Front Wheels

10

Image 10
Contents Model No. PCTL69030 Serial No QUESTIONS?Serial Number Decal Table of Contents Important PrecautionsNever insert any object into any opening Never move the walking belt while the powerMove the Treadmill on Erty damage sustained by or through the use of this productFor your benefit, read this manual carefully before Before YOU Begin485 Right SideHandrail Bolt AssemblyAssembly requires two people Slide a Handrail Cap 41 onto one of the HandrailsImportant Make sure that both Wires are fully insert Do not force the connectors together. Next, plugOther Wire into the other connector on the Console Base ScrewsCould result in damage to the control system HOW to Plug in the Power CordTM Walking Belt This product must be grounded.If it should malBattery Installation Console DiagramSTEP-BY-STEP Console Operation Adjust the incline of the treadmill as desired Insert the key fully into the power switchReset the Speed Control and start the walking belt Follow your progress with the LED trackTreadmill, make sure to lift with your legs rather HOW to Fold the Treadmill for StorageHOW to Move the Treadmill Mill over an uneven surfaceBend your legs and keep your back straight HOW to Lower the Treadmill for USEStorage Solution TroubleshootingUnplug the Power Cord Power Cord Problem The incline system does not function properlyProblem The walking belt slows when walked on Belt has shifted to the leftExercise Intensity HOW to Measure Your Heart RateConditioning Guidelines Workout GuidelinesHOW to Order Replacement Parts Exercise FrequencyLimited Warranty Part No R0803APart LIST-Model No. PCTL69030 Key Qty DescriptionRemove this Exploded Drawing and Part List from the Manual Exploded R0803A