ProForm PCTL69030 user manual Never move the walking belt while the power, Move the Treadmill on

Page 3

13.Keep the power cord and the surge suppres- sor away from heated surfaces.

14.Never move the walking belt while the power

is turned off. Do not operate the treadmill if the power cord or plug is damaged, or if the treadmill is not working properly. (See

BEFORE YOU BEGIN on page 4 if the tread- mill is not working properly.)

15.Never start the treadmill while you are stand- ing on the walking belt. Always hold the handrails while using the treadmill.

16.The treadmill is capable of high speeds. Adjust the speed in small increments to avoid sudden jumps in speed.

17.Never leave the treadmill unattended while it

is running. Always remove the key and

unplug the power cord when the treadmill is not in use.

18.Do not attempt to raise, lower, or move the treadmill until it is properly assembled. (See ASSEMBLY on page 5, and HOW TO FOLD

AND MOVE THE TREADMILL on page 10.)

You must be able to safely lift 20 kg (45 lbs) to raise, lower, or move the treadmill.

19.When folding or moving the treadmill, make sure that the storage latch is fully closed.

20.Inspect and properly tighten all parts of the treadmill regularly.

21.Never insert any object into any opening.

22. DANGER: Always unplug the power cord immediately after use, before cleaning the treadmill, and before performing the maintenance and adjustment procedures

described in this manual. Never remove the motor hood unless instructed to do so by an authorized service representative. Servicing other than the procedures in this manual should be performed by an authorized serv- ice representative only.

23.This treadmill is intended for in-home use only. Do not use this treadmill in a commer- cial, rental, or institutional setting.

WARNING: Before beginning this or any exercise program, consult your physician. This is especially important for persons over the age of 35 or persons with pre-existing health prob- lems. Read all instructions before using. ICON assumes no responsibility for personal injury or prop-

erty damage sustained by or through the use of this product.

SAVE THESE INSTRUCTIONS

The decal shown at the right has been placed on your treadmill. If the decal is missing, or if it is not legible, please call our Customer Service Department, toll-free, to order a free replace- ment decal (see ORDERING REPLACEMENT PARTS on page 15

of this manual). Apply the decal in the location shown.

Note: The decal is shown at 38% of actual size.

3

Image 3
Contents QUESTIONS? Model No. PCTL69030 Serial NoSerial Number Decal Important Precautions Table of ContentsErty damage sustained by or through the use of this product Never move the walking belt while the powerMove the Treadmill on Never insert any object into any openingRight Side Before YOU Begin485 For your benefit, read this manual carefully beforeSlide a Handrail Cap 41 onto one of the Handrails AssemblyAssembly requires two people Handrail BoltScrews Do not force the connectors together. Next, plugOther Wire into the other connector on the Console Base Important Make sure that both Wires are fully insertThis product must be grounded.If it should mal HOW to Plug in the Power CordTM Walking Belt Could result in damage to the control systemConsole Diagram Battery InstallationSTEP-BY-STEP Console Operation Follow your progress with the LED track Insert the key fully into the power switchReset the Speed Control and start the walking belt Adjust the incline of the treadmill as desiredMill over an uneven surface HOW to Fold the Treadmill for StorageHOW to Move the Treadmill Treadmill, make sure to lift with your legs ratherHOW to Lower the Treadmill for USE Bend your legs and keep your back straightStorage Troubleshooting SolutionUnplug the Power Cord Belt has shifted to the left Problem The incline system does not function properlyProblem The walking belt slows when walked on Power CordWorkout Guidelines HOW to Measure Your Heart RateConditioning Guidelines Exercise IntensityExercise Frequency HOW to Order Replacement PartsPart No R0803A Limited WarrantyKey Qty Description Part LIST-Model No. PCTL69030Remove this Exploded Drawing and Part List from the Manual R0803A Exploded