ProForm PETL49910.0 user manual Top, Problem The walking belt slows when walked on

Page 20

Locate the Reed Switch (62) and the Magnet (67) on

 

 

 

the left side of the Pulley (64). Turn the Pulley until the

 

1/8 in.

 

Magnet is aligned with the Reed Switch. Make sure

 

64

that the gap between the Magnet and the Reed

 

38

Switch is about 1/8 in. (3 mm). If necessary, loosen

 

62

67

the #8 x 3/4" Tek Screw (38), move the Reed Switch

 

slightly, and then retighten the Screw. Reattach the

 

Top

 

Motor Hood (not shown), and run the treadmill for a

 

 

few minutes to check for a correct speed reading.

 

View

 

PROBLEM: The incline of the treadmill does not change correctly

 

 

 

SOLUTION: a. With the key in the console, press one of the Incline buttons. While the incline is changing, re-

move the key. After a few seconds, re-insert the key. The treadmill will automatically rise to the

maximum incline level and then return to the minimum level. This will recalibrate the incline system.

PROBLEM: The walking belt slows when walked on

 

 

 

SOLUTION: a. If an extension cord is needed, use only a 3-conductor, 14-gauge (1 mm2) cord that is no longer

than 5 ft. (1.5 m).

 

 

 

b. If the walking belt is overtightened, treadmill perfor-

b

 

 

mance may decrease and the walking belt may be-

2–3 in.

 

come damaged. Remove the key and UNPLUG THE

 

 

POWER CORD. Using the hex key, turn both idler

 

 

 

roller bolts counterclockwise 1/4 of a turn. When the

 

 

 

walking belt is properly tightened, you should be able

 

 

 

to lift each edge of the walking belt 2 to 3 in. (5 to 7

 

 

 

cm) off the walking platform. Be careful to keep the

 

 

 

walking belt centered. Then, plug in the power cord,

 

Idler Roller Bolts

 

insert the key, and run the treadmill for a few minutes.

 

 

Repeat until the walking belt is properly tightened.

 

 

 

c. If the walking belt still slows when walked on, please see the front cover of this manual.

20

Image 20
Contents QUESTIONS? Model No. PETL49910.0 Serial NoTable of Contents Important Precautions Page Before YOU Begin Assembly 4445 Wire Tie Large Hole See the left inset drawing. Identify the two Outer side of the Frame Spacer facingTighten the Bolt yet See the left inset drawing. Identify the outerUpright Wire Front View Side View View from Above 47 8 Operation and Adjustment HOW to Plug in the Power CordPRE-LUBRICATED Walking Belt AustraliaConsole Diagram Features of the ConsoleHOW to Turn on the Power HOW to USE the Manual ModeInsert the key into the console Start the walking beltTurn on the fan if desired Follow your progress with the track and the displaysMeasure your heart rate if desired HOW to USE a Preset Workout Information Mode HOW to Fold and Move the Treadmill HOW to Fold the TreadmillHOW to Move the Treadmill HOW to Lower the Treadmill for USETroubleshooting Problem The power turns off during useProblem The walking belt slows when walked on TopProblem Solution Walking belt is off-center or slips when walked onExercise Guidelines Exercise IntensityWorkout Guidelines Exercise FrequencyPart LIST-Model No. PETL49910.0 Key No. Qty DescriptionExploded Drawing A-Model No. PETL49910.0 R0810A Exploded Drawing B-Model No. PETL49910.0 R0810A Exploded Drawing C-Model No. PETL49910.0 R0810A Exploded Drawing D-Model No. PETL49910.0 R0810A Ordering Replacement Parts Recycling Information

PETL49910.0 specifications

The ProForm PETL49910.0 treadmill is a standout piece of fitness equipment designed for users seeking to enhance their home workout experience. Ideal for cardio enthusiasts and individuals looking to maintain or improve their fitness levels, this treadmill is packed with features that cater to a wide range of exercise needs.

One of the most notable aspects of the ProForm PETL49910.0 is its robust construction. The treadmill features a heavy-duty frame that ensures stability, allowing users to run or walk without the concern of wobbling or shaking. The running surface is spacious, providing ample room for comfortable strides. The treadmill's foldable design is another key characteristic, making it a space-saving option for home gyms.

When it comes to technology, the ProForm PETL49910.0 offers a range of updates that elevate the workout experience. Equipped with a high-definition display, users can easily monitor essential metrics such as speed, distance, time, and calories burned. This visibility encourages goal tracking and enhances motivation during workouts. The treadmill also includes several pre-set workout programs, catering to different fitness levels and preferences. These programs are designed to keep workouts engaging and challenging.

The ProForm PETL49910.0 incorporates advanced cushioning technology, ensuring that users experience a low-impact workout. This is particularly beneficial for those who may be recovering from injuries or individuals who prefer to reduce the stress placed on their joints while exercising. The treadmill’s adjustable incline feature allows users to increase the difficulty of their workouts, simulating outdoor running conditions and effectively targeting different muscle groups.

Furthermore, the ProForm PETL49910.0 is compatible with Bluetooth technology, enabling users to connect their devices and stream music or workout programs seamlessly. This connectivity enhances the exercise experience and keeps users entertained during their routines.

Overall, the ProForm PETL49910.0 is an excellent choice for anyone looking to invest in a quality treadmill that combines durability, technology, and user-friendly features. Its design, along with its advanced functionalities, makes it a valuable addition to any home gym setup, allowing users to achieve their fitness goals effectively and conveniently.