ProForm PETL49910.0 user manual Troubleshooting, Problem The power turns off during use

Page 19

TROUBLESHOOTING

Most treadmill problems can be solved by following the steps below. Find the symptom that applies, and follow the steps listed. If further assistance is needed, please see the front cover of this manual. PROBLEM: The power does not turn on

SOLUTION: a. Make sure that the power cord is plugged into a properly earthed outlet (see page 12). If an ex-

tension cord is needed, use only a 3-conductor, 14-gauge (1 mm2) cord that is no longer than 5 ft.

(1.5 m).

 

 

b. After the power cord has been plugged in, make sure that the key is inserted into the console.

c. Check the power switch located on the treadmill

c

 

frame near the power cord. If the switch protrudes

 

as shown, the switch has tripped. To reset the

 

 

switch, wait for five minutes and then press the

Tripped

Reset

switch back in.

PROBLEM: The power turns off during use

 

 

SOLUTION: a. Check the power switch (see the drawing above). If the switch has tripped, wait for five minutes and then press the switch back in.

b.Make sure that the power cord is plugged in. If the power cord is plugged in, unplug it, wait for five minutes, and then plug it back in.

c.Remove the key from the console. Reinsert the key into the console.

d.If the treadmill still will not run, see the front cover of this manual.

PROBLEM: The console displays remain lit when you remove the key from the console

SOLUTION: a. The console features a display demo mode, designed to be used if the treadmill is displayed in a

store. If the displays remain lit when you remove the key, the demo mode is turned on. To turn off

the demo mode, hold down the Stop button for a few seconds. If the displays are still lit, see THE

INFORMATION MODE on page 17 to turn off the demo mode.

 

 

PROBLEM: The displays of the console do not function properly

 

 

 

SOLUTION: a. Remove the key from the console and UNPLUG THE

a

 

 

POWER CORD. Next, remove the two #12 x 1 1/4"

1

65

Screws (4) and the two #8 x 3/4" Hood Screws (65)

 

and carefully remove the Motor Hood (1).

 

4

4

 

 

 

19

Page 18 Page 20
Image 19
Page 18 Page 20
Contents Model No. PETL49910.0 Serial No QUESTIONS?Table of Contents Important Precautions Page Before YOU Begin Assembly 4445 Wire Tie Large Hole See the left inset drawing. Identify the outer See the left inset drawing. Identify the twoOuter side of the Frame Spacer facing Tighten the Bolt yetUpright Wire Front View Side View View from Above 47 8 Australia Operation and AdjustmentHOW to Plug in the Power Cord PRE-LUBRICATED Walking BeltFeatures of the Console Console DiagramStart the walking belt HOW to Turn on the PowerHOW to USE the Manual Mode Insert the key into the consoleMeasure your heart rate if desired Follow your progress with the track and the displaysTurn on the fan if desired HOW to USE a Preset Workout Information Mode HOW to Lower the Treadmill for USE HOW to Fold and Move the TreadmillHOW to Fold the Treadmill HOW to Move the TreadmillProblem The power turns off during use TroubleshootingTop Problem The walking belt slows when walked onWalking belt is off-center or slips when walked on Problem SolutionExercise Frequency Exercise GuidelinesExercise Intensity Workout GuidelinesKey No. Qty Description Part LIST-Model No. PETL49910.0Exploded Drawing A-Model No. PETL49910.0 R0810A Exploded Drawing B-Model No. PETL49910.0 R0810A Exploded Drawing C-Model No. PETL49910.0 R0810A Exploded Drawing D-Model No. PETL49910.0 R0810A Recycling Information Ordering Replacement Parts

PETL49910.0 specifications

The ProForm PETL49910.0 treadmill is a standout piece of fitness equipment designed for users seeking to enhance their home workout experience. Ideal for cardio enthusiasts and individuals looking to maintain or improve their fitness levels, this treadmill is packed with features that cater to a wide range of exercise needs.

One of the most notable aspects of the ProForm PETL49910.0 is its robust construction. The treadmill features a heavy-duty frame that ensures stability, allowing users to run or walk without the concern of wobbling or shaking. The running surface is spacious, providing ample room for comfortable strides. The treadmill's foldable design is another key characteristic, making it a space-saving option for home gyms.

When it comes to technology, the ProForm PETL49910.0 offers a range of updates that elevate the workout experience. Equipped with a high-definition display, users can easily monitor essential metrics such as speed, distance, time, and calories burned. This visibility encourages goal tracking and enhances motivation during workouts. The treadmill also includes several pre-set workout programs, catering to different fitness levels and preferences. These programs are designed to keep workouts engaging and challenging.

The ProForm PETL49910.0 incorporates advanced cushioning technology, ensuring that users experience a low-impact workout. This is particularly beneficial for those who may be recovering from injuries or individuals who prefer to reduce the stress placed on their joints while exercising. The treadmill’s adjustable incline feature allows users to increase the difficulty of their workouts, simulating outdoor running conditions and effectively targeting different muscle groups.

Furthermore, the ProForm PETL49910.0 is compatible with Bluetooth technology, enabling users to connect their devices and stream music or workout programs seamlessly. This connectivity enhances the exercise experience and keeps users entertained during their routines.

Overall, the ProForm PETL49910.0 is an excellent choice for anyone looking to invest in a quality treadmill that combines durability, technology, and user-friendly features. Its design, along with its advanced functionalities, makes it a valuable addition to any home gym setup, allowing users to achieve their fitness goals effectively and conveniently.
Top Page Image Contents