Omron Healthcare HJ-720ITC instruction manual Troubleshooting Tips, Problem Cause Solution

Page 37

TROUBLESHOOTING TIPS

Problem	Cause	Solution

The Low Battery	The battery is low	Replace the battery with
Indicator blinks.	or worn.	a new one (CR2032).

	The polarities of	Insert the battery in
	battery (+ and -)	correct alignment.
	are aligned in the	Refer to BATTERY
Nothing is	wrong directions.	INSTALLATION on page
displayed.		10.

	The battery is worn.	Replace the battery with
	The battery is worn.	a new one (CR2032).
		a new one (CR2032).

	The unit is
	positioned
	incorrectly.
	Irregular movement.	Refer to ATTACHING THE
	Irregular movement.	PEDOMETER on page 17.
The displayed		PEDOMETER on page 17.
The displayed
values are	Inconsistent pace.
incorrect.
	Up and down
	movement.

	The set values	Check the weight and stride
	are wrong.	length settings.

37

Image 37

Contents Model HJ-720ITC Table of Contents Introduction Operating the Device Important Safety InformationCare and Maintenance Know Your Unit Components How to attach the strap to the main unit300 x 0.95 = 285 kcal Aerobic Step FunctionStride Length Measurement How to measure your stride lengthOpen the battery cover Insert the battery Battery InstallationReplace the battery cover Battery Replacement Setting range 1200 AM-1159 PM Install the battery Setting the TimePress the MEMO/ Button to advance by increments of one hour Press the SET Button to set the hourPress the SET button to set the minute Setting range 70 to 300 lb Setting the WeightPress the SET Button to set the weight Press the MEMO/ Button To advance by increments of 1 lbSetting range 100 to 400 feet Setting the Stride LengthPress the MEMO/ Button To advance by increments of 1 inch Press the SET Button to set the stride lengthPlace the unit in your pocket Attaching the PedometerWalking at an inconsistent pace Unit moves irregularlyUp and down movement Vibrations from a moving vehicleChanging the Display Using the Event FunctionPress the MODE/EVENT Button to change the display Press the MEMO/ Button. The previous day data is displayed Using the Memory FunctionUsing the Memory Function Press the System Reset Button on the back of the main unit Use the System Reset function in the following caseOmron Health Management Software Installing the SoftwareOperating Environment Requirements Installing the Software Installing the Software Installing the Software Installing the Software Installing the Software Installing the Software Installing the Software Using the Software Using the Software Transferring Data to a Personal Computer Open the USB Connector coverTransferring Data to a Personal Computer Software Trouble Shooting Tips Clean the unit with a soft dry cloth. Do not Care and MaintenanceProblem Cause Solution Troubleshooting TipsHJ-720ITC SpecificationsFCC Statement Limited Warranty WarrantyPage Omron Healthcare, Inc