Star Trac S-TBT, S-RB, E-RB, S-UB manual Star Trac Universal TV Bracket Installation

Page 11

STEP4

Mount the Personal Viewing Screen on the Treadmill. Using the 5mm Hex Allen Key, screw in the (2) M8 Button heads at the base of the PVS.

STEP5

Adjust the display cap up or down to align with the holes on the display front. Once the cap is aligned, tighten the button head screws with the 5mm Hex Allen Key .

STEP6

Replace the top back plastic. Use a #2 Phillips screwdriver insert the (8) screws, retained from earlier step, into the plastic. Do Not tighten at this time.

Check the cap with the neck and grommet. Make sure the cap is flush with the top back plastic. Adjust if necessary. Use the screwdriver to tight - en the screws snug from the previous step. Caution: Do Not over tighten screws.

STAR TRAC UNIVERSAL TV BRACKET INSTALLATION

11

Image 11
Contents Installation M a N U a L Table of Contents TBT, RB, and UB Introduction Check Facilities Preparedness Required Tool for Installation Supplied Installing Your Universal TV Bracket KIT Star Trac Universal TV Bracket Installation Star Trac Universal TV Bracket Installation To install the TV neck on the E-TR, follows the se steps Star Trac Universal TV Bracket Installation Star Trac Universal TV Bracket Installation To install the TV neck on the S-TR, follows these steps To install the TV on the bracket follows these steps Star Trac