ProForm PFEL05807 user manual Repeat this step for the other side, Elliptical exerciser

5. Apply a small amount of grease to the axle on	5
the right Crank Arm (36) and to a Wave Washer
(93). Then, slide the Wave Washer onto the
Crank Arm.
Also, apply a small amount of white grease,
which is marked with a “For Wheels” sticker, to
the Roller (22) on the Right Roller Leg (21);
spread the grease evenly around the Roller.			36
Slide the Right Roller Leg (21) onto the axle on			93 21
the right Crank Arm (36) and set the Roller (22)
on the Base (1). Attach the Right Roller Leg			83
with an M10 x 15mm Patch Screw (82), a Crank
			Grease
Axle Cap (30), and an M10 x 25mm x 1.5mm
Washer (83).			30 82
Repeat this step for the other side of the	1	Grease
elliptical exerciser.
	22
6. Attach the Center Frame Cover (27) to the Base	6
(1) with six M4 x 12mm Flange Screws (73).
			73
		27
		73
		1	73
	8