ProForm PFANBE2525.0 user manual Important Precautions

Page 3

IMPORTANT PRECAUTIONS

WARNING: To reduce the risk of serious injury, read the following important precautions before using the weight bench.

1.Read all instructions in this manual and all warnings on the weight bench before using the weight bench. Use the weight bench only as described in this manual.

2.It is the responsibility of the owner to ensure that all users of the weight bench are ade- quately informed of all precautions.

3.The weight bench is intended for home use only. Do not use the weight bench in any commercial, rental, or institutional setting.

4.Keep the weight bench indoors, away from moisture and dust. Place the weight bench on a level surface, with a mat beneath it to protect the floor or carpet. Make sure that there is enough clearance around the weight bench to mount, dismount, and use the weight bench.

5.Inspect and properly tighten all parts regular- ly. Replace any worn parts immediately.

6.Keep hands and feet away from moving parts.

7.Keep children under 12 and pets away from the weight bench at all times.

8.Always wear athletic shoes for foot protec- tion while exercising.

9.The weight bench is designed to support a maximum of 610 pounds, including a maxi- mum user weight of 300 pounds. Do not place more than 310 pounds, including the barbell, on the weight rests. Do not place more than 150 pounds of weight on the leg lever. Note: The weight bench does not include a barbell or weights.

10.Always make sure that the locking pin is fully inserted into the pivot bracket and the frame before exercising.

11.If you feel pain or dizziness while exercising, stop immediately and begin cooling down.

WARNING: Before beginning this or any exercise program, consult your physician. This is especially important for persons over the age of 35 or persons with pre-existing health problems. Read all instructions before using. ICON assumes no responsibility for personal injury or property damage sustained by or through the use of this product.

3

Image 3
Contents Model No. PFANBE2525.0 Serial No QUESTIONS?Table of Contents Important Precautions Before YOU Begin Right SideLeft Side Make Assembly Easier AssemblyTighten the Nylon Locknuts yet Piece of tape over the Bolt heads to hold Them in placeSee . Tighten the M10 Nylon Locknuts Used in step Page Page Attaching the Curl PAD AdjustmentsToning Weight LossExercise Guidelines Muscle BuildingExercise Form Part Identification Chart Page Key No. Qty Description Part LIST-Model No. PFANBE2525.0Exploded DRAWING-Model No. PFANBE2525.0 R0906A Ordering Replacement Parts