ASSEMBLY
Make Assembly Easier
Everything in this manual is designed to ensure that the weight bench can be assembled suc- cessfully by anyone. Most people find that by setting aside plenty of time, assembly will go smoothly.
Before beginning assembly, carefully read the following information and instructions:
•Assembly requires two people.
•Make sure that there is enough clearance to walk around the weight bench as you assemble it.
•Place all parts in a cleared area and remove the packing materials. Do not dispose of the packing materials until assembly is completed.
•As you assemble the weight bench, make sure all parts are oriented as shown in the drawings.
•Tighten all parts as you assemble them, unless instructed to do otherwise.
•For help identifying small parts, use the PART IDENTIFICATION CHART.
The included hex keys 
and the follow- ing tools (not included) may be required for assembly:
• Two adjustable wrenches
• One rubber mallet
• One standard screwdriver
• One Phillips screwdriver
• Clear tape or masking tape, and soapy water.
Assembly will be more convenient if you have a socket set, a set of
1.Attach a Seat Base Bumper (31) to the Left Base (33) with an M4 x 16mm
The Uprights (4) can be assembled at an Olympic width or a
For an Olympic width, attach an Upright (4) to the outside of the Left Base (33) with an M10 x 55mm Button Bolt (47) and an M10 Washer (37); and with two M10 x 95mm Button Bolts (46) and two M10 Nylon Locknuts (41).
Attach the Left Foot (16) to the Left Base (33) with two M4 x 16mm
For a
Repeat this step with the Right Base (not shown). Make sure that the Right Base is ori- ented as shown in step 3.
1 |
|
|
|
| 4 |
4 | 17 |
|
33 |
|
|
|
| 37 |
33 | 47 | 41 |
|
| |
31 | 16 |
|
39 |
| 39 |
38 | 39 | |
|
| |
|
| 46 |
|
| 38 |
5