ProForm PFANBE2525.0 user manual Tighten the Nylon Locknuts yet

2. Attach the Front Foot (15) to the Seat Base (1)	2
with two M4 x 16mm Self-tapping Screws (38)
and two M4 Washers (39).
	15		1
		39
	39
		38
3. Attach the Right and Left Bases (2, 33) to the	3
Seat Base (1) with two M10 x 58mm Button Bolts
(48) and two M10 Nylon Locknuts (41). Do not
tighten the Nylon Locknuts yet.
Insert two M10 x 100mm Screws (45) up through	2
the Base Plate (34) and the Seat Base (1). Place
a piece of tape over the Bolt heads to hold	48
them in place.	1
		33
	34	41
	45
4. Orient the Center Base (3) as shown and attach it	4
to the Right and Left Bases (2, 33) with eight M10		41
			Decal
x 55mm Button Bolts (47), eight M10 Washers
		3
(37), and eight M10 Nylon Locknuts (41).			41
	37			41
See step 3. Tighten the M10 Nylon Locknuts	47
(41) used in step 3.
	37	2
		33
			37	37
			47	47

6