ASSEMBLY
Make Assembly Easier
This manual is designed to ensure that the exercise rack can be assembled successfully by anyone. Most people find that by setting aside plenty of time, assembly will go smoothly.
Before beginning assembly, carefully read the following information and instructions:
•Assembly requires two people.
•For help identifying small parts, use the PART IDENTIFICATION CHART.
•Place all parts in a cleared area and remove the packing materials. Do not dispose of the packing materials until assembly is completed.
•Tighten all parts as you assemble them, unless instructed to do otherwise.
•As you assemble the exercise rack, make sure all parts are oriented as shown in the drawings.
The following tools (not included) are required for assembly:
• Two adjustable wrenches
• One rubber mallet
• One standard screwdriver
• One Phillips screwdriver
Assembly will be more convenient if you have a socket set, a set of
1. | 1 |
| |
Before beginning assembly, make sure you |
| ||
understand the information in the box | 23 | 24 | |
above. Important: Some of the parts |
| ||
|
| ||
described in the assembly steps may be |
|
| |
preassembled. | 24 | 2 | |
|
| ||
Attach one side of the Center Base (2) to the |
|
| |
Base (1) with two M10 x 90mm Bolts (26), two |
| 26 | |
M10 Washers (24), and two M10 Nylon Locknuts |
| ||
1 | Decal | ||
(23). Make sure the warning decal is in the | |||
| |||
|
| ||
position shown. Do not tighten the Nylon |
|
| |
Locknuts yet. |
|
| |
Repeat this step for the other side of the |
|
| |
Center Base (2). |
|
|
6