ProForm PFBE1416.0 user manual Part Identification Chart

Page 5

PART IDENTIFICATION CHART

See the drawings below to identify small parts used in assembly. The number in parentheses by each drawing is the key number of the part from the PART LIST on page 14. Note: Some small parts may have been preat- tached. If a part is not in the parts bag, check to see if it has been preattached.

M10 Nylon

Locknut (23)

M6 Washer (25)

M10 Washer (24)

M10 x 95mm Bolt (10)

M10 x 90mm Bolt (26)

M10 x 70mm Screw (29)

M6 x 70mm Screw (28)

M10 x 65mm Screw (30)

M10 x 30mm

Screw (27)

M4 x 16mm

Self-tapping

Screw (8)

M10 x 200mm Bolt (31)

5

Image 5

Contents Model No. PFBE1416.0 Serial No QUESTIONS?Call TOLL-FREE Mon.-Fri., 6 a.m.-6 p.m. MSTTable of Contents Important Precautions Before YOU Begin Assembled DimensionsPart Identification Chart Make sure the warning decal is AssemblyMake Assembly Easier Tighten the M10 Nylon Locknuts 23 used Steps Nylon Locknuts yetNylon Locknuts 23. Do not tighten the Nylon Locknuts yet Attach the Right Handle 13 in the same man- ner Repeat this step for the other side of the Dip Arm Adjusting the DIP ARM AdjustmentsExercise Guidelines Staying Motivated Muscle ChartCooling Down Date Exercise Weight Sets RepsAerobic Exercise Thursday Aerobic Exercise DateQty Description Part LIST-Model No. PFBE1416.0Exploded DRAWING-Model No. PFBE1416.0 Icon Health & FITNESS, INC., 1500 S W., LOGAN, UT Ordering Replacement PartsLimited Warranty