Part Identification Chart

Refer to the drawings below to identify small parts used in assembly. The number in parentheses by each draw- ing is the key number of the part, from the PART LIST in the center of this manual. Note: Some small parts may have been pre-attached. If a part is not in the parts bag, check to see if it has been pre-attached.

25mm Round Inner Cap (45)

25mm Square Inner Cap (24)

25mm Round Angle Cap (32)

50mm Square

Inner Cap (25)

M4 x 16mm Screw (39)

M6 x 16mm Screw (40)

M6 x 38mm Screw (48)

M10 Washer (41) M8 Washer (26) M6 Washer (34)

M10 x 45mm Button Bolt (35)

M6 x 63mm Screw (33)

M8 Nylon Locknut (44)

M8 x 63mm Button Bolt (49)

M10 x 68mm Button Bolt (38)

M10 Nylon Jamnut (46)

M10 x 73mm Button Bolt (42)

M10 x 93mm Button Bolt (37)

M10 Nylon Locknut (43)

M10 x 155mm Button Bolt (36)