![](/images/new-backgrounds/1271362/2713629x1.webp)
ASSEMBLY
To hire an authorized service technician to assemble the elliptical exerciser, call
Assembly requires two persons. Place all parts of the elliptical exerciser in a cleared area and remove the | |||
packing materials. Do not dispose of the packing materials until assembly is completed. In addition to the | |||
included hex keys, assembly requires a phillips screwdriver | , an adjustable | ||
wrench | , and a rubber mallet | . |
|
As you assemble the elliptical exerciser, use the drawings below to identify small parts. The number in parentheses below each drawing is the key number of the part, from the PART LIST on page 17. The number following the parentheses is the quantity needed for assembly. Note: Some small parts may have been preassembled. If a part is not in the parts bag, check to see if it has been preassembled.
|
|
|
|
|
|
|
|
|
|
|
M4 x 16mm | M4 x 22mm | M8 Split | M10 Split |
| M8 Washer | |||||
Screw | Screw | Washer | Washer |
Wave Washer
|
|
|
|
|
|
|
|
|
|
|
|
M8 Jamnut | M8 Nylon | M10 Nylon | Cover Screw | M8 x 16mm |
| ||||||
Button | |||||||||||
Locknut | Locknut | Screw |
|
| M8 x 45mm Button |
M8 x 25mm Patch | ||
Screw | Bolt |
M10 x 75mm Carriage Bolt
M10 x 45mm Button Bolt
M8 x 72mm Button Bolt
M10 x 83mm Button Screw
M10 x 59mm Bolt Set
5