Harnesses do not, Get pinched, This step

ProForm PFEL3926.1 Harnesses do not, Get pinched, This step, Make sure, Wire harnesses, Pinched

Page 7

4.While another person holds the Upright (2) in the posi- tion shown, connect the Upper Wire Harness (86) to the Extension Wire Harness (95).

Next, insert the Upright (2) into the Mast (15); make sure that the Upright is oriented as shown. Attach the Upright with two M8 x 70mm Button Bolts (67), two M8 Split Washers (83), and two M8 Nylon Locknuts (46). Make sure that the Wire Harnesses (86, 95) do not get pinched and damaged during this step. Do not tighten the Button Bolts yet.

Attach the Water Bottle Holder (72) to the Upright (2) with two M4 x 22mm Screws (76).

5.The Console (5) requires four D batteries (not includ- ed); alkaline batteries are recommended. Press the tab on the battery door and remove the battery door. Insert four batteries into the Console as shown. Make sure that the batteries are oriented as shown by the markings on the battery door. Reattach the battery door.

6.While another person holds the Console (5) near the Upright (2), connect the wire harness on the Console to the Upper Wire Harness (86). Insert the excess wire harness down into the Upright. Next, attach the Console to the Upright with four M4 x 16mm Screws (66). Be careful to avoid pinching the wire har- nesses.

4	Make sure the wire
	harnesses do not
	get pinched and
	damaged during
2		this step.
2			72
			72
			76
86
95		83
46			67
Hexagonal		83	67
Holes		83
	15
5			5
			5
			Batteries
			Battery
			Cover
	Batteries
6
5			Make sure the
	Wire	wire harnesses
86	Wire		do not get
86	Harness		pinched and
		damaged during
66	66		this step.
66	66
	2

Image 7

Contents

Model No. PFEL3926.1 Serial No QUESTIONS?Table of Contents Important Precautions Front Before YOU BeginBack Assembly Locknut the Wheel should turn freely Wire harnesses doDuring this step This step Wire harnessesHarnesses do not Get pinchedPage Handlebar Leg must be able to pivot freely HOW to Adjust the Stride of the Elliptical Exerciser HOW to USE the Elliptical ExerciserHOW to Exercise on the Elliptical Exerciser HOW to USE the HandlebarsSelect the manual mode Diagram of the ConsoleFeatures of the Console HOW to USE the Manual Mode 1 Turn on the consoleTurn on the console. See on Select a heart rate program HOW to USE a Heart Rate ProgramFollow your progress with the display Turn on the fan if desiredSelect a preset program HOW to USE a Preset ProgramTurn on the console Begin pedaling to start the program HOW to USE a Calorie Goal ProgramTurn on the console. See on Select a calorie goal program Battery Replacement Maintenance and TroubleshootingHandgrip Pulse Sensor Troubleshooting Exercise Frequency Conditioning Guidelines WarningExercise Intensity Workout GuidelinesQty Description Part LIST-Model No. PFEL3926.1R0706A Exploded Drawing B-Model No. PFEL3926.1 Limited Warranty HOW to Order Replacement PartsIcon Health & FITNESS, INC., 1500 S W., LOGAN, UT

Related manuals

ProForm PFEL3926.1 Harnesses do not, Get pinched, This step, Make sure, Wire harnesses, Pinched

harnesses do not

get pinched and

this step.

Make sure the

wire harnesses

do not get

pinched and