MAINTENANCE AND TROUBLESHOOTING
Inspect and properly tighten all parts of the elliptical exerciser regularly. Replace any worn parts immedi- ately.
For smooth operation of the elliptical exer- ciser, inspect
and clean the incline ramp
regularly using a soft cloth and mild detergent. Other parts of the elliptical exerciser can also be cleaned
in this way. Keep liquids off the console. Never use abrasives or solvents.
PULSE SENSOR TROUBLESHOOTING
If the chest pulse sensor does not function properly, see CHEST PULSE SENSOR TROUBLESHOOTING on page 11.
If the handgrip pulse sensor does not function proper- ly, see step 5 on page 16.
HOW TO CALIBRATE THE INCLINE SYSTEM
If the elliptical exerciser’s incline system is not working properly, activate the calibration process by following the steps below.
1.Hold down the Resistance 1 button and the Program Select button at the same time for about five seconds. Note: Numbers may appear in the main display. Disregard these numbers.
2.Press the Program Select button again. Note: A combination of letters and numbers may appear in the main display.
3.Press the 30° Ramp button. The ramp will move all of the way up and then all of the way down.
4.Press the Program Select button three times. The console will then be in the normal operating mode and the elliptical exerciser will be ready for use.
HOW TO MOVE THE ELLIPTICAL EXERCISER
Stand in front of the elliptical exerciser, hold the han- dlebars firmly, and place one foot against the ramp in the location shown below. Pull the handlebars until the elliptical exerciser can be moved on the front wheels, and carefully move the elliptical exerciser to the desired location. Then, place one foot against the ramp, and lower the elliptical exerciser. Due to the size and weight of the elliptical exerciser, use extreme caution while moving and lowering it.
Handlebars |
Place your |
foot here |
Wheel |
HOW TO LEVEL THE ELLIPTICAL EXERCISER
If the elliptical exerciser rocks during use, turn one or both of the leveling feet under the rear
stabilizer until the
rocking motion isLeveling
eliminated.Foot
26