The calories, fat calories, time, distance, or speed modeÑ Repeatedly
press the
mode button until a bar appears below or above the name of the desired mode. (Note: When the time mode is selected, no bar will appear; when the speed mode is selected, the letters MPH will appear instead of a bar.) Make sure that there is not a bar above the word Òscan.Ó
If desired, press the on/reset button to reset the lower display.
5Turn off the power
To turn off the power, simply wait for about six minutes. If the pedals are not turned and the buttons are not pressed for six minutes, the power will turn off automatically.
MAINTENANCE
Inspect and tighten all parts of the elliptical trainer regularly. Replace any worn parts immediately.
The elliptical trainer can be wiped clean with a soft cloth and mild detergent. Do not use abrasives or solvents. To prevent damage to the console, keep liquids away from the console. Use only a sealable water bottle in the console.
CONSOLE TROUBLE-SHOOTING
If the console does not function properly, the batteries should be replaced. To replace the batteries, refer to assembly step 7 on page 8.
STORAGE
When storing the elliptical trainer, remove the batter- ies from the console. Keep the elliptical trainer in a clean, dry location, away from moisture and dust.
11