PART IDENTIFICATION CHART
Use the chart below for help identifying the small parts used in assembly. The number in parenthesis below each part refers to the key number of the part. The second number refers to the quantity used in
assembly. Note: Some parts may have been pre- attached for shipping purposes. If a part is not found in the parts bag, check to see if it has been
M10 x 25mm Button Screw (8)Ð5
M8 x 90mm Carriage Bolt (30)Ð4
M4 x 12mm Console Screw (4)Ð4 | M4 x 16mm Screw (9)Ð1 |
M8 Split Washer (49)Ð4 | M10 Split Washer (41)Ð5 | M8 Nylon Locknut (21)Ð8 |
|
5