Assembly

To hire an authorized service technician to assemble the elliptical exerciser, call toll-free 1-800-445-2480.

Assembly requires two persons. Place all parts of the elliptical exerciser in a cleared area and remove the
packing materials. Do not dispose of the packing materials until assembly is completed. In addition to the
included allen wrenches, assembly requires a phillips screwdriver			, an adjustable
wrench	, and a rubber mallet	.

As you assemble the elliptical exerciser, use the drawings below to identify small parts. The number in parentheses below each drawing is the key number of the part, from the PART LIST on page 21. The second number is the quantity needed for assembly. Note: Some small parts may have been pre-assembled. If a part is not in the parts bag, check to see if it has been pre-assembled.

Star Washer	M8 Split	Wave Washer	M8 Washer
(112)–8	Washer (90)–3	(111)–2	(88)–6

M8 Jamnut	M8 x 15mm Button
(79)–5	Screw (116)–8

M4 x 14mm	M4 x 16mm	M4 x 32mm	M4 x 45mm	M6 x 20mm Button
M4 x 14mm	Round Head	Round Head	M4 x 45mm	M6 x 20mm Button
Screw (104)–8	Screw (101)–14	Screw (105)–6	Screw (108)–2	Screw (77)–4

Hub Screw (87)–8

		M8 x 43mm Button




M8 x 23mm Shoulder	M8 x 23mm Button
Screw (115)–4	Screw (84)–4	Bolt (78)–4

M8 x 69mm Button	M10 x 82mm Button
Bolt (80)–1	Screw (82)–2
	M10 x 127mm Button Screw (83)–2