ProForm PFEL54932 user manual

Page 6

1.Identify the Front Stabilizer (3). While another person lifts the front of the Frame (1), attach the Front Stabilizer to the Frame with two M10 x 112mm Carriage Bolts (34) and two M10 Nylon Locknuts

(106).Make sure that the Front Stabilizer is turned so the Wheels (32) are not touching the floor.

2.While another person lifts the back of the Frame (1), attach the Rear Stabilizer (4) to the Frame with two M10 x 112mm Carriage Bolts (34) and two M10 Nylon Locknuts (106).

3.Identify the Frame Axle (104), which is the longest axle. Slide an M8.5 Washer (45) and a Ramp Cap

(102)onto an M8 x 19mm Patch Screw (108). Tighten the Patch Screw into one end of the Frame Axle (104). Next, apply a small amount of the included grease to the Frame Axle.

Locate the two Frame Bushings (103) in the Frame (1). Press a Ramp Shield (18) onto each Frame Bushing. Next, align the indicated tubes on the Ramp (59) with the Ramp Shields. Make sure that the Ramp is turned as shown. Insert the Frame Axle (104) into the Ramp, the Ramp Shields, and the Frame Bushings. Note: It may be helpful to use a rubber mallet to insert the Frame Axle.

Slide an M8.5 Small Washer (45) and a Ramp Cap (102) onto an M8 x 19mm Patch Screw (108). Tighten the Patch Screw into the other end of the Frame Axle (104).

4. Identify the Incline Axle (100), which is the longest remaining axle. Slide an M6 Large Washer (94) onto an M6 x 16mm Button Screw (109). Tighten the Button Screw into one end of the Incline Axle (100). Next, apply a small amount of grease to the Incline Axle. Raise the Ramp (59). Insert the Incline Axle (100) through one side of the Ramp, through a Ramp Spacer (99), through the end of the Incline Motor (82), through another Ramp Spacer (99), and then through the other side of the Ramp.

Slide an M6 Large Washer (94) onto an M6 x 16mm Button Screw (109). Tighten the Button Screw into the other end of the Incline Axle (100).

6

1

34

 

 

32

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

32

 

 

 

 

 

 

 

 

 

3

 

1 106

 

 

2

 

 

 

 

 

 

 

 

 

 

106

 

 

 

 

 

 

 

 

 

 

 

1061

 

4

34

 

3

 

 

59

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

Tubes102

45 108

 

 

 

 

 

 

 

18

 

Grease

 

 

 

 

108 102

 

 

 

 

 

 

45

104

1

18

103

 

 

 

 

 

 

4

 

99

 

 

 

 

 

 

 

 

 

 

94

 

 

 

 

 

 

 

109

 

 

59

 

 

 

 

 

 

 

 

 

 

 

 

Grease

 

 

 

 

 

 

94

 

100

82

 

 

 

 

109

 

 

 

 

 

 

 

 

 

 

 

Image 6
Contents QUESTIONS? Model No. PFEL54932 Serial NoTable of Contents Important Precautions Back Before YOU BeginFront Right SideAssembly Page Make sure Wire harnessesThis step Make sure Wire harnesses Do not get Pinched Do not get PinchedPage Page HOW to USE the Elliptical Crosstrainer HOW to Plug in the Power Cord This product Must be groundedHOW to Exercise on the Elliptical Crosstrainer Features of the Console HOW to USE the Manual Mode Turn on the consoleMetal contacts. Avoid moving your hands Lower sec- tion of the large display will show yourOff the plastic Turn on the fan if desiredHOW to USE a Smart Program Select one of the Smart programsBegin pedaling to start the program HOW to Connect Your CD PLAYER, VCR, or Computer AudioCable HOW to Connect Your Home Stereo HOW to Connect Your ComputerHOW to Connect Your VCR Press the play button on your CD player or VCR HOW to USE Programs Directly from OUR WEB Site Return to the elliptical crosstrainer and begin pedalingHOW to Level the Elliptical Crosstrainer Maintenance and TroubleshootingHOW to Move the Elliptical Crosstrainer Handgrip Pulse Sensor TroubleshootingWorkout Guidelines Conditioning GuidelinesExercise Intensity Exercise FrequencyKey Qty Description Qty Description KeyExploded DRAWING-Model No. PFEL54932 R1204AHOW to Order Replacement Parts Limited WarrantyIcon Health & FITNESS, INC., 1500 S W., LOGAN, UT