ACCUSPLIT® EAGLE™ 1590
REPLACING THE BATTERY
When the display starts to dim or goes blank, it is time to replace the battery. Your pedometer uses one Type LR44 1.5 volt alkaline battery.
To replace:
1. Insert a coin into the slot on the bottom of the case, and twist counterclockwise to loosen the case front. Lift case front away.
REGISTER NOW Please return your AE1590 Registration to the Repair Center address in the warranty, and we will let you know about future products.
Email (preferred) User
2.Using a pen or other thin object, push battery sideways out of its holder. Replace it with a new battery. The battery’s positive (+) terminal should be FACE UP while you put it into the pedometer.
3.Align case front over the pedometer and press gently to snap cover back into place, starting with top.
See label inside the lid of your pedometer
EXCLUSIVE DISTANCE ACCURACY TIP |
|
|
Maximize the accuracy of your distance measurement by: | • RESET display to zero. | |
• Walking a measured 0.5 or 1.0 mile/km. (We recommend | • | Walk the track again to test the adjustment, and |
that you use a |
| accordingly. |
high school). | • Once adjusted DO NOT ALLOW ANYONE ELSE TO CHANGE | |
• Compare the DISTANCE recorded to the measured |
| THE SETTING because the Activity Pedometer is now set for |
distance. If the pedometer shows you walked LESS than you | • | your style. |
actually did, reset your STEP LENGTH to a longer setting. If | You are now ready to walk any route, change that route freely | |
the pedometer shows you walked MORE than you actually |
| and still get an accurate measurement of distance for your |
did, reset the STEP LENGTH to a shorter setting. |
| fitness or recreation program. |
|
|
|
Eat Right! Walk More! Live Well! The ACCUSPLIT Lifestyle