Using the Battery

Installing the Battery

To install the LiIon battery:

1.Insert the battery into the opening on the back of the phone at a 45-degree angle, making sure to line up the gold contacts. Gently press down until the battery snaps into place.

2.Install the protective cover by lining up the tabs at a 45-degree angle, and gently press down until the cover snaps into place.

Removing the Battery

Warning! Do not handle a damaged or leaking Lilon battery as you can be burned.

To remove your battery:

1.Make sure the power is off so that you don’t lose any stored numbers or messages. Remove the protective cover by pressing the release latch and pulling up on the back of the cover.

2.With the tab on the top left of the battery, use your thumbnail to lift and then remove the battery as indicated in the diagram.

8

1. The Basics

Page 14
Image 14
Sanyo SCP-6600 manual Using the Battery, Installing the Battery, Removing the Battery