Making and Answering Calls
Holding Your Phone
To maximise performance, do not obstruct the bottom portion of your phone where the internal antenna is located while using the phone.
CorrectIncorrect
Internal Antenna
Making Calls
To place a call using your keypad:
1.Make sure your phone is on.
2.Enter a phone number from standby mode. (If you make a
mistake while dialing, press to erase one digit at a time. Press and hold to erase the entire number.)
3.Press or .
4.Press or close the phone (see “To activate the Close Flip feature:” on page 39) when you are finished.
To place a call with the flip closed:
1.Make sure your phone is on and the Side Key Guard feature is disabled. (See “Setting the Side Key Guard” on page 40.)
2.Press and hold on the left side of the phone.
3.Follow the system prompts. (The call will be made in speakerphone mode unless you have a headset attached to the phone.)
▶Say the name of your registered Voice Dial entry (see the note
below) or press again to redial.
Note: To use a Voice Dial, you must have stored Voice Dial entries. (See "Using
1. The Basics | 11 |