Sleep Mode

This feature helps conserve your battery power by disabling the display after a specified amount of time.

To set sleep mode:

1.Select > Settings > Display > Others > Sleep Mode.

2.Select Main LCD or Sub LCD.

3.Select your desired option. (Select Off to deactivate this feature.)

Power Save Mode

This feature helps conserve your battery power by setting the Main LCD, Sub LCD, and key pad backlights to “Always Off,” and by setting the Main LCD sleep mode to “after 30 sec.” and the Sub LCD sleep mode to “after 5 sec.”.

To set this feature:

1.Select > Settings > Display > Power Save Mode.

2.A message appears. Press OK (left softkey) to continue.

3.Select On. (Select Off to deactivate this feature.)

Location Settings

Your phone is equipped with a Location feature for use in connection with location-based services that may be available in the future.

The Location feature allows the network to detect your position. Turning Location off will hide your location from everyone except emergency numbers e.g. 111.

Note: Even if the Location feature is enabled, no service may use your location without your express permission.

To enable your phone’s Location feature:

1.Select > Settings > Location.

(The Location disclaimer is displayed.)

2.Read the disclaimer and press OK (left softkey).

3.Select On or Off.

When the Location feature is on, your phone’s standby screen will display the icon. When Location is turned off, the icon will be displayed.

2. Your Phone’s Settings

33

Page 39
Image 39
Sanyo SCP-6600 manual Location Settings, Sleep Mode, Select Settings Display Power Save Mode, Select Settings Location