Sanyo SCP-6600 Setting a Start-up/Power-off Tone, Using Voice Prompt, Setting Up Key Press Echo

Models: SCP-6600

1 133
Download 133 pages 45.29 Kb
Page 34
Image 34

Setting a Start-up/Power-off Tone

To set a Start-up/Power-off tone:

1.Select > Settings > Sounds > Others.

2.Select Start-up Tone or Power-off Tone.

3.Scroll to your desired tone and press .

Using Voice Prompt

This feature allows you to hear voice prompts when using Voice Memo, etc. (default setting is Off).

To enable or disable voice prompt:

1.Select > Settings > Sounds > Others > Voice Prompt.

2.Select On or Off.

Tip: When ringer volume is set to “Silence All,” voice prompts cannot be heard.

Setting Up Key Press Echo

With this feature, you can hear a voice say the numbers when you press the keypad.

To turn Key Press Echo on or off:

1.Select > Settings > Sounds > Others > Key Press Echo.

2.Select On or Off.

Adjusting the Phone’s Volume Settings

To adjust your phone's volume settings:

1.Select > Settings > Sounds > Ringer/Key Vol.

2.Select Ringer Volume, Calendar/Alarm, Start-up/Pw-off, or Key Beep.

3.Adjust a volume level by pressing the navigation key up or down and press .

To adjust the earpiece or speaker volume:

1.Select > Settings > Sounds > Receiver Vol.

2.Select either Earpiece or Speaker.

3.Adjust a volume level by pressing the navigation key up or down and press .

28

2. Your Phone’s Settings

Page 34
Image 34
Sanyo SCP-6600 manual Setting a Start-up/Power-off Tone, Using Voice Prompt, Setting Up Key Press Echo