Setting Up Screen Call

This feature enables you to screen incoming calls by using a recorded announcement, either one that is pre-recorded or one that you record. You can also record the caller’s message into the Voice Memo list.

Activating Screen Call

To start Screen Call when you have incoming calls:

When the phone rings or vibrates, press Options (right softkey) > Screen Call.

To set Auto Screen Call:

1.Select > Tools > Voice Services > Screen Call > Auto.

2.Select On.

3.Set the answering time by using numeric keys or by pressing the navigation key up or down.

4.Press or OK (left softkey). (The icon is displayed on the standby display.)

Tip: While the caller’s message is being recorded, press to answer the call,

or press to stop recording and disconnect the call.

Selecting a Screen Call Announcement

To select a Screen Call announcement:

1.Select > Tools > Voice Services > Screen Call > Announcement.

2.Depending on your preference, select Pre-Recordedor Custom.

Note: To record your own announcement, see page 81.

80

9. Voice Services

Page 86
Image 86
Sanyo SCP-6600 manual Setting Up Screen Call, Activating Screen Call, Selecting a Screen Call Announcement