Seiko Y182 manual Date Setting, Crown

Page 5

DATE SETTING

Date

1

1

2

CROWN 1

3

4

NOTES

CROWN 1

1Pull out to first click.

2Turn clockwise until the date for the previous day appears.

3Pull out to second click and turn until the desired date appears.

4Push back in to normal position.

English

1Do not set the date between 9:00 p.m. and 3:00 a.m. Otherwise, the date may not change properly.

*If it is necessary to set the date during that time period, first change the time to any time outside this period, set the date and then reset the correct time.

2It is necessary to adjust the date at the end of February and 30-day months.

5

Image 5
Contents Page Contents Seiko Analogue Quartz FeaturesThere are three buttons and two crowns Display and CROWNS/BUTTONSCrown Date SettingWhen setting Hour hand, check that AM/PM is correctly set Time SettingAdjustment of Alarm hands AlarmTion Alarm time settingAlarm engaged Alarm disengaged Alarm engagement Alarm disengagementPull out to first click Push back in to normalStopwatch Operation StopwatchStart Stop Finish Time 2ND Competitor Reset To measure the hourly average speed of a vehicle TachymeterTo measure the hourly rate of operation Adjusting the Hand Position Resetting the BUILT-IN IC Battery Change Battery Life IndicatorEnglish